Many chainsaw manufacturers install Oregon chains as original equipment on their new saws, and I know from 40+ years of using chainsaws that Oregon is first rate. You won’t find a Powersharp sharpened chain to be quite as effective as a brand new chain, and it’s certainly not as good as chains I sharpen with my electric chainsaw sharpener. You’ll need a special chain and sharpener to fit your particular chainsaw.
STIHL Pro Tip Providing you observed these rules you will achieve perfect sharpening results, the correct side plate and top plate angles will be obtained automatically and best possible cutting performance guaranteed. The filing gauge for the next chain pitch up may be used for this purpose. Count the number of file strokes and use the same number on each cutter to obtain cutters of identical length.
Sold at Home Depot, Sears, and other retailers, Oregon’s PowerSharp comes in several versions that differ according to a chain saw’s bar length and whether you’re retrofitting it for the first time. While the starter kit costs about $60, the price tag will be half that when the time comes to replace just the chain and sharpener. The same technology is bundled into a model in our chain saw tests, the cordless Oregon CS250S, at $400 the most expensive we tested.
how to use yellow chainsaw sharpener Related Question:
What angle do I set my chainsaw sharpener?
Always file at right angles to the guide rail. The right sharpening angle depends on the saw chain and the wood that you want to cut. The sharpening angle will generally be between 25° and 35° – the harder the wood, the greater the angle.
How many times can I sharpen a chainsaw chain?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
Why do chainsaws cut on an angle?
One major reason a chainsaw curves to either the right or left during a cut is that it was unevenly sharpened. The unequal teeth of the chain cause it to take a different-sized bite into the wood. What is this? The uneven sharpness of the chain is mainly due to manual sharpening, especially with the use of a file.
Are PowerSharp chains any good?
I have used the PowerSharp on an Echo CS-400 18″ , and an Echo CS-360 .” “These don’t cut quite as fast as a normal chain, nor does it have the normal “pull” into the wood as a semi-chisel chain, but this chain stays sharp for 2-3x longer than Oregon or other chains.
How does PowerSharp chainsaw sharpener work?
How Does The Oregon PowerSharp Work? The premise is pretty simple: by clipping the PowerSharp sharpener over the tip of your bar and chain, and then firing up your chainsaw, you can manage to sharpen all of the teeth on your chainsaw within seconds.
When should you throw away a chainsaw chain?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.
Is it worth it to sharpen a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
How long should a chainsaw bar last?
Re: how long does a bar last The next, a Granberg, lasted about 2 months. About that time Stihl started using them with the same results. A good bar can be filed a few times on both sides and the tip replaced when needed. They could last almost as long as the saw.
How often should you flip the bar on your chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
Do you flip the bar on a chainsaw?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
Why does my chainsaw bar smoke?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Why does my chainsaw burn the wood?
Your chainsaw burns wood because of poor lubrication Lubrication allows the mechanical parts to coordinate much better by avoiding a phenomenon of friction which risks causing traces of burns. This is one of the main reasons that your appliance gives off too much heat and that the wood burns.