Plus, from a safety perspective: if the chain is backwards all the cutters are facing you! Chain direction is not rocket science, but it’s very important for running a chainsaw effectively. Follow these 4 steps to get your chainsaw chain headed in the right direction. If any of this chain component terminology is unclear to you, or if you’re just interested to learn more, check out this in-depth explanation of the anatomy of a chainsaw chain.
Chainsaw blades are directional and only move in a clockwise direction. The first step towards ensuring that the chainsaw blade runs in the right direction is attaching the chainsaw bar. In case your chainsaw is cutting slowly, it shows that the blades are dull and need sharpening or have not been properly installed.
Getting the chainsaw chain direction right is very straightforward. In the chainsaw chain direction picture below, the Husqvarna 450 powerhead is on the right and the tip on the left. You can also see the chain direction when looking at the bottom of the bar, facing back toward the powerhead. Hopefully, that makes things clear and you won’t end up with a chainsaw chain on backward!
Putting a chain on a chainsaw the right way is a rather important step in properly using your chainsaw. The easiest way to replace or correct a chain on a chainsaw after you’ve taken the machine apart is to start by reattaching the chain bar to the body of the chainsaw. Again, if the blades of the chain are not facing the correct way, you will think the blade is dull because it is cutting in the wrong direction.
are chainsaw blades universal Related Question:
Are all chain saw blades the same?
Not every bar or chain is right for every saw. For example, larger chainsaw bars work best with more powerful saws because it takes more energy to drive a chain around a long bar. That’s why electric saws use bars 18″ and shorter. Similarly, chainsaw chains are measured to fit certain bars.
How do I know what chainsaw blade to buy?
To get the correct size, simply count 3 rivets on the chain and measure the distance between them from the centre points. Now divide this by half to get your size. As an example, three rivets that measure ½ an inch across divided by two gives you a pitch of a ¼ inch.
Can you put a different size blade on a chainsaw?
Most chainsaws can operate up to three different bar sizes. Guide bars are measured in length, from the tip of the bar to the heel, and range in size from 14 to over 40 inches.
Can you use a Husqvarna chain on a Stihl chainsaw?
As a general answer, Husqvarna chains can go on a Stihl chainsaw. Though they can fit onto the Stihl chainsaw perfectly, these two chainsaw brands use different standard pitch sizes.
Are chainsaw chains interchangeable between brands?
No, chainsaw blades are not universal, not every bar and chain will fit on your machine. Chainsaw chains need to have the correct specification to fit on your bar. If you have a chain that is too long or too narrow it will not fit. Mixing brands of chains is no problem as long as they are compatible.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
Can I put a 16 inch bar on a 14 inch chainsaw?
Different Bar Sizes This length differs from the overall length, which manufacturers use less than the cutting length. A Poulan 14 chainsaw can operate with a bar that’s 12, 14, 16 and 18 inches length. However, a larger bar may not always give the best cutting performance.
Why are chainsaw bars shorter?
A shorter chain doesn’t compound torque like a smaller gear does. The amount of force applied at any point on the chain is identical. However, the shorter bar limits how much contact the chain can make with the wood.
Does Oregon chain fit Stihl?
Oregon R55 AdvanceCut Chainsaw Chain for 16-Inch Bar -55 Drive Links – low-kickback chain fits several Stihl models. This product is only available through retailers or servicing dealers. Designed to fit most chainsaw models that require a 3/8 Inch low-profile pitch, .
Can you use a Oregon bar on a Husqvarna chainsaw?
Chainsaw Bar & H78 Chain, Fits Husqvarna, Poulan, Makita, Craftsman, Jonsered, McCulloch and more (577330) | Oregon Products.
Can I use a different brand chain on my Stihl chainsaw?
Stihl manufacturers replacement parts, including chains, as well as chain saws. Stihl recommends using its own chains as replacements, but after-market manufacturers produce similar chains that may be used on a Stihl chain saw.
Can I use a Husqvarna chain on a Poulan?
The older Poulan bar slot is for larger bar studs which will fit on the smaller Husqvarna 435. Just needs a homemade wire adapter to snug it up. Poulan bar may oil through its adjuster hole, if not easy to drill a new hole. Only thing to worry about is chain pitch size and drive link gauge thickness.
Will Stihl chain fit Poulan?
Product Description. STIHL 63 PM3-56 chainsaw chain made in Switzerland with high quality steel. This chain fits Homelite, Poulan, Echo, Craftsman, Remington and others with the same specs.
What chainsaw chains do professional loggers use?
Full-chisel teeth chains are usually used by professionals on large saws. Semi-chisel teeth are rounded, so the risk of kickback is less, and they stay sharper longer. Semi-chisel teeth cut slower but are a better choice in dirty wood than full chisel.
Whats the difference between green and yellow Stihl chains?
Others will chime, looks like green is homeowner (and dirty condition) safety chain. That stays sharper longer in dirty conditions. The yellow looks like full chisel, cuts faster but dulls quicker. I like full chisel and just keep it sharp.