The reason a special type of chainsaw bar oil exists is that chainsaw chains and bars need a lubricant with certain qualities to keep those parts running smoothly. Motor oil will work to keep your chainsaw from burning up if you don’t have any standard bar oil on hand. Hydraulic oil is similar to motor oil and you can use it as a chainsaw bar oil substitute when you have nothing else available.
You could even get luckier and find a chainsaw bar that qualifies as a universal replacement, but it doesn’t mean it fill fit all chainsaws. It will shed light on among other things, whether chainsaw bars are universal and if at all, there is a possibility of finding a replacement that would fit onto every saw you ever owned. You should not just walk into a chainsaw accessory shop nearby to buy a replacement bar for your chainsaw.
“Then use it for your chain saw to oil the chain. It’s a way to recycle the oil. It cuts the same with old oil or new.” Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil. Terry said he’s been doing this for about three years with the same chain saw, and he hasn’t had to buy any bar and chain oil in that time.
Heat from summer thins oil, and cold from winter makes it thick. To prevent this, chainsaw manufacturers make bar oils matched to the air temperature and the saw in which it is operated. Although they don’t disclose the weight of their oil, the University of Missouri Extension recommends in lieu of using a bar oil, select SAE 30 weight oil in summer and SAE 10 in winter.
is chainsaw bar oil universal Related Question:
Is all chainsaw bar oil the same?
The viscosity of chainsaw bar oil can vary depending on the formula but 30W is standard. In cold weather, a thin 10W chainsaw oil may be advantageous, while very hot temperatures may require a much thicker 40W or 50W formula.
Can I use any oil for chainsaw bar?
Generally, chainsaws can handle a wide range of lubricants. Vegetable and canola oils work well, and automobile motor oil will too, as long as you observe the SAE ratings and use the appropriate oil weight for the season. Always use fresh, never used, oils.
Does chainsaw bar oil matter?
Petroleum-based bar oil has been the standard for chainsaws. Lightweight oil is used in winter and heavier oil in summer. Manufacturers of chainsaws make bar and chain oils specially blended for their machines to extend their lifespan, but if they are not available, the owner’s manual suggests alternatives.
What kind of oil do you use for bar and chain on a chainsaw?
If your manufacturer’s bar and chain oil is unavailable, you can use SAE 30 weight motor oil to lube your chain during the summer and SAE 10 weight during the winter, according to the University of Missouri Extension.
Can I use 10w30 for chainsaw bar oil?
As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil. That’s because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.
Are there different types of bar oil?
Bar-and-chain oil comes in two types: summer and winter. Egelhoff explains that summer and winter oils have different viscosity. Winter oil is thinner, allowing it to run smoothly even in cold temperatures and when stored for awhile. Summer oil is thicker, heavier and formulated to work in hot conditions.
Can you use transmission fluid for chainsaw bar oil?
On occasion I’ve used tranny fluid to clean out old oil residue in old chainsaws . It works well . In addition to that tranny fluid seems to pump better on some saws with whimpy oilers in cold weather .
What is bar oil equivalent to?
Canola oil It is thinner than regular vegetable oil, meaning it will tend to fly off the chainsaw more quickly – but it has a more suitable viscosity at lower temperatures so makes a good substitute for chainsaw oil when it is too cold to use vegetable oil.
What does 10W30 mean?
The 10W30 designation on engine oil means that the viscosity of the oil is rated at 10W when an engine is cold, and 30 when the engine is hot. This is different than an oil labelled 5W30, which has a thinner viscosity when the engine is cold at 5W.
Can you use 10w40 in a chainsaw?
You can but it’s not very good for the chain or the environment. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn’t fling off the chain as easily or poison your garden! 10w30. Thicker.
Is it OK to use engine oil as bar oil?
While motor oil is not the best substitute for chainsaw bar oil, it will work as a temporary measure if find you have no other option. The downside of motor oil is that it’s not sticky enough to stay on the bar and chain. So, when you’re using the chainsaw, the motor oil will fling off as you cut and make quite a mess.
Can you lube transmission oil as chain?
It’s perfectly fine to use gear oil for lubing motorcycle’s chain, I’m myself using it for years. Use 90 grade gear oil if you lube every 500–700km while the thicker 140 grade oil lasts for 800–1000 km. Also, there’s no need to clean the chain every 500km. Clean the chain when it’s visibly dirty & mucky.
Can power steering fluid be used as bar?
The power steering and gear fluid for your car would work just fine for your saw chain and lube. Synthetic oil, such as power steering fluid and gear oil are great chain lubricant. These are lightweight oil, that can prevent chain brake and bar jamming.
What type of oil does a Stihl chainsaw use?
The gas-oil mix for a Stihl chain saw is 50 to1. That’s equal to 2.5 fluid ounces of low ash two-cycle engine oil per 1 gallon of mid-grade gasoline having an 89 octane rating and no more than 10 percent ethanol. When mixing, pour the oil into the container first and then add the gasoline.