Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
If you’ve ever passed through logging country, you might have seen loggers using a chainsaw with all of the logos and words on the chainsaw bar upside down. Chainsaw bar rails – Chainsaw bar rails are a slot or groove around the perimeter of the chainsaw bar where the saw chain itself rides while the saw is in operation. Since a chainsaw accident is potentially deadly, chainsaw operators must scrutinize their chainsaw before every operation to ensure that no part of the chainsaw is worn or damaged and in need of attention.
The need to flip your chainsaw bar is better demonstrated when you consider the fact that the majority of the chainsaw’s cutting action takes place at the base of the bar. In all, how often your flip your chainsaw bar is dependent on your schedule and importantly, your chainsaw use. In conclusion, flipping your chainsaw bar could make all the difference in the longevity of your chainsaw bar as well as that of the chainsaw itself.
When pruning we tend to use the end of the bar as we stretch to reach the limbs of the tree and then the third area is on top of the bar when there is the chance of the wood pinching the bar as the branch of the trunk begins to fall. The idea behind flipping the bar is to spread the wearing areas of the bar so that the bar not only lasts twice as long, but it also ensures a safer operation of the saw. Although flipping the bar will almost double the life of the bar there will come a time when the chain begins to wonder, and the safety of the saw is reduced.
Flipping the bar gives you twice the life as the top doesn’t wear nearly as fast if at all. You can tell bars that haven’t been flipped, they cut curves in your trees and eventualy only cut half way thru your tree then bogs down. Probably not, my way has just become a habit – and I said I am probably overdoing it – but it doesn’t “Cost” anything, when the bar is off anyway, for cleaning……. ciscoguy01.
why do you flip a chainsaw bar Related Question:
How often should I flip my chainsaw bar?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
What are the holes in a chainsaw bar for?
These two holes are used to hold the saw blade. if your chainsaw blade not have holes or just have one hole. it not work. if you know how to drill, you can drill two holes on your chainsaw blade.
Can you switch bars on a chainsaw?
Replacing your chainsaw bar will require a few measurements. Most chainsaws can operate up to three different bar sizes. Guide bars are measured in length, from the tip of the bar to the heel, and range in size from 14 to over 40 inches.
What chainsaw chains do professional loggers use?
Full-chisel teeth chains are usually used by professionals on large saws. Semi-chisel teeth are rounded, so the risk of kickback is less, and they stay sharper longer. Semi-chisel teeth cut slower but are a better choice in dirty wood than full chisel.
Why does my chainsaw blade dull so quickly?
Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.
Can I drill a hole in chainsaw bar?
Re: Drilling a Chainsaw Bar Drilling that bar may not be as difficult as you think. It will be best if you use a drill press, start with a pilot hole, and then drill to the size you need. Make sure you have a sharp bit, run at the lowest speed you can, and use cutting fluid.
Are chainsaw bars standard?
To preface, the standard bar lengths for chainsaws are 16, 18, and 20 inches. However, longer bars do exist and can exceed 24 inches. When taking a measurement, you should round to the nearest even whole number.
Can I put a 20 inch bar on my 18-inch chainsaw?
Changing the bar and chain on your 18-inch chain saw to a 20-inch size will enable easier cutting of larger trees and branches. Larger chain saws cut through thicker trees and limbs.
Can I put any length bar on a chainsaw?
Stihl’s electric saws come in three different sizes: the MSE 140 can handle a bar between 12 and 16 inches, the MSE 180 can take a bigger 18-inch bar, and the MSE 220 takes a bar between 16 and 20 inches. The little battery-powered MSA 160 is equipped with a 12-inch bar.
Why is my chainsaw burning the wood?
Your chainsaw burns wood because of poor lubrication Lubrication allows the mechanical parts to coordinate much better by avoiding a phenomenon of friction which risks causing traces of burns. This is one of the main reasons that your appliance gives off too much heat and that the wood burns.
How long does a chainsaw bar last?
Re: how long does a bar last The next, a Granberg, lasted about 2 months. About that time Stihl started using them with the same results. A good bar can be filed a few times on both sides and the tip replaced when needed. They could last almost as long as the saw.
Can a bent chainsaw bar be straightened?
Solid body bars with replaceable noses can be straightened by hammering with the bend peak up on a flat anvil. Laminated bars need a piece of rubberized belting of approximate 1/4″ thickness between bar and anvil to properly hammer straighten .
What does full chisel mean on a chainsaw chain?
A full chisel chain is designed for the fast cutting action. In comparison to the semi-chisel chain, this chain has square-cornered teeth which makes it more aggressive when cutting.
What chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).
How long should a chainsaw chain stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.