It ultimately comes down to the factors listed above (especially maintenance). That being said, you can expect a quality chainsaw to last you at least 10 years or more. But if you take care of it, I know people who have saws that have lasted 20-30 years and even longer.
Because each brand creates different saws with different materials, different needs, etc… you’re going to get different life expectancies. Let’s say you use the chainsaw every single day for one hour straight…. That means the saw would last you for a minimum of 5.5 years before dying. Keep in mind this time is rated for professional chainsaws and not for regular homeowner saws.
There are a lot of things you can do to help your chainsaw last longer then you would think. Treating your chainsaw properly is the key factor, in keeping your chainsaw alive. It does feel like the more modern chainsaws don’t last as long as they use to.
The EPA ratings for emissions compliance time are partly scientific, partly political, and partly based on expected intensity of engine use. Engines expected to be used a high percentage of the time have higher emissions durability requirements imposed by EPA. For an example of EPA error, consider the gas mileage stickers posted on new cars. EPA revamped the criteria once and will do so again, soon.
If you have a lot of work for your chainsaw, it is good to know how long you can run your machine before you have to add gas or change/charge the battery. STIHL claims a forty-five-minute runtime with a chainsaw and battery, but it is hard to equate what runtime minutes mean with a chainsaw. If you want to store your chainsaw for a long time and find it seeping oil for many days, then the problem is with the vacuum relief valve.
how long does a chainsaw engine last Related Question:
When should I replace my chainsaw?
Once the wear markers have been met it’s essential to replace the chainsaw chain. Filing past the wear marker will greatly reduce the chain’s cutting performance, and increases the risk of the tooth breaking off. Ideally you should reach the tooth and depth gauge markers at roughly about the same time.
Do chainsaws lose power over time?
Over time, spark plugs can become weak, and will not provide an adequate spark. This will cause your chainsaw’s engine to lose power.
How long does the average chainsaw chain last?
The lifetime of a chainsaw chain has no fixed limit and depends on usage and maintenance. The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
How often should you sharpen a chainsaw?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
What chainsaw do professional loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
Is it worth sharpening a chainsaw?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
What do you do with an old chainsaw?
Gas and oil can be disposed of at a household hazardous waste collection site for free. Remove non-metal parts and place in the trash. Metal parts can be recycled as scrap metal.
What causes chainsaw to bog down?
Many chainsaw operators first notice a problem with chainsaws bogging down when they’re using the chainsaw under load, and this is usually the result of poor air circulation. This issue is caused by a clogged air filter on the chainsaw.
Why does my Stihl chainsaw bog down when cutting?
Stihl carburetors have three adjustment screws. One controls the fuel mixture when the engine is idling, one controls it when the engine is operating at low speed and one is for high-speed fuel control. When the saw bogs down during cutting, it’s usually the high-speed screw you need to adjust.
Why does my chainsaw cut out when hot?
When your chainsaw quits after it gets hot, you either have a problem with gas flow being restricted into the engine or with the spark. This is a common occurrence on older-model chainsaws. By replacing your spark plugs and keeping your gas lines clear you can reduce the chances of this problem recurring.
What is the longest lasting chainsaw chain?
Even more durable than standard chain is carbide-tip chainsaw chain. Carbide tips last longer than chrome and are not affected by heat. Because of these qualities, carbide chain is excellent for cutting objects that would dull standard chain quickly, such as railroad ties.
How much does it cost to sharpen chainsaw chain?
A typical chainsaw can be sharpened up to 10 times before it’s time for a replacement. The cost to have a chainsaw sharpened ranges from $13 to $16. The average cost per chainsaw sharpening is $14.50 for people who choose to have their chainsaws professionally sharpened.
Why does my chainsaw blade go dull so fast?
Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.
Should I sharpen my chainsaw chain or buy a new one?
Sharpen before replacing In general maintenance of a chainsaw is important because it can help prolong the lifespan of the different parts of your machine, as well as the machine itself. If your chainsaw chain becomes dull after a long lifespan, it will struggle to cut through the wood at the efficiency it once had.
Why do loggers Run chainsaw bars upside down?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.