With a long and proud history of producing the latest equipment needed for home renovation and construction and based in Rochester, Staffordshire, England, JCB aims to provide high quality power tools and hand tools handymen everywhere. JCB power tools also come in premium sets for the home or constructions site. Trust in JCB, as since our conception we have focused on innovation to the power tool industry producing high quality mitre saws and complementary mitre saw stands, orbital and sheet palm sanders, circular, brushless and mitre saws, cordless multi-tools and sliding bevel saws.
JCBDIY.com Customer Helpline 0333 0143092 SAFETY WARNINGS FOR ALL SAWS a) DANGER: Keep hands away from cutting area and the blade. The blade washers and bolt were specially designed for your saw, for optimum performance and safety of operation. FURTHER SAFETY INSTRUCTIONS FOR ALL SAWS Kickback causes and related warnings – kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an uncontrolled saw to lift up and out of the workpiece toward the operator; – when the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the motor reaction drives the unit rapidly back toward the operator; If the blade becomes twisted or misaligned in the cut, the teeth at the back edge of the blade can dig into the top surface of the wood causing the blade to climb out of the kerf and jump back toward the operator.
Whilst we always recommend you use a guide rail when cutting larger sheets of material, there are a few alternative methods for making straight cuts in smaller materials. Our image shows how to do so, but it is as simple as running the base plate of your circular saw along the side of the square to achieve a straight cut. Most circular saws also come with a guide fence included as standard, which slots into your saw and allows for straight cuts.
how to use jcb circular saw Related Question:
Why won’t my miter saw lift up?
Depending on the model, it may require twisting, but typically is only an inward, outward movement of the pin. The blade should lift up automatically when the pin is released. The guard should cover the blade as it lifts. If it doesn’t, it’s likely dirty or stuck and should be cleaned to move freely with the blade.
Which side should the blade be on a circular saw?
For blade-right models, the correct circular saw blade direction is usually with the label side out. For saws that have the blade on the left, it typically installs with the “ugly” side out.
Which way should the teeth face on a circular saw?
The teeth should be cutting UPWARDS, in a clock-wise direction. You’ll also notice that when your blade is installed correctly, the teeth will be pointing upward. Remember: circular saws (as most saws) cut on the upward stroke.
Why is my circular saw blade loose?
Bearings and washers are mainly responsible for holding a saw’s shaft in place. However, wobbles and misalignments may loosen the blade. This can cause problems while cutting. Moreover, the bolt of the circular saw may wear out after regular use.
How tight should a circular saw blade be?
In general, the blades on right-handed circular saws turn counterclockwise, so you’d tighten the bolt clockwise; the blades on left-handed circular saws turn clockwise, so you’d tighten the bolt counterclockwise.
Why does my circular saw blade stop spinning?
The most common reason your circular saw blade stops spinning is because your workpiece is pinching the blade. This can also cause the blade to kickback. To prevent this from happening you need to support your workpiece properly to allow it to set securely through the entire cut.
How do you use a circular saw without a sawhorse?
In some cases, it might be better to use your circular saw without a sawhorse. If you need to make cuts without a work support, you can lay a sturdy, stationary surface under the material while making cuts.
Can you cut wet wood with a circular saw?
If you’re cutting wet wood set the depth so that the entire gap between the teeth is clear of the board you’re cutting. This will stop your saw and cut line from getting clogged with wet saw dust.
When using a circular saw be sure to cut on the waste side of the cut mark to allow for the blades?
Never use a circular saw that does not have an upper blade guard because the. guard protects you from touching the blade. When using a circular saw,be sure to cut on the waste side of the cut mark to allow of the blade’s. Saws with fine blades that are excellent for delicate and intricate cutting are called.
Can I use a jigsaw instead of a circular saw?
Although a jigsaw can be used for most of the tasks that a circular saw can perform, including straight cuts and cuts on a tilt, the jigsaw uses that really take advantage of the tool’s qualities are jobs such as kitchen fitting and joinery, with their frequent need for complex cuts.
What is in dry lube?
The two main dry lubricants are graphite and molybdenum disulfide. They offer lubrication at temperatures higher than liquid and oil-based lubricants operate. Dry lubricants are often used in applications such as locks or dry lubricated bearings.
What is NLGI No 2 grease?
The most commonly used greases, such as those used in automotive bearings, would use a lubricant that is NLGI grade 2, which has the stiffness of peanut butter. Grades within this range can operate in a higher temperature range and at higher speeds than NLGI grades 000-0.
What does a spindle lock do?
Most cordless impact drivers have a feature called spindle lock that, when selected, locks the motor’s spindle so the chuck cannot turn. Most models of impact driver will have ‘automatic spindle lock’, which means that the chuck and metal bit are automatically locked when the speed control trigger is released.
Where is the arbor lock on a circular saw?
Place the saw on a wooden surface and pull back the blade guard. If the saw has an arbor lock button on the top of the housing, press it in. The arbor is the shaft the blade installs on. If there’s no lock button, press the blade into the wooden surface.
How much does a miter saw cost?
A basic compound miter saw starts at $100, while miter saws with sliding blades start at $125. Dual-bevel miter saws start at $200, and professional-level miter saws with special features can cost as much as $800.
