I thought it would be good to put together an article on handling circular saw kickback and throw in some additional safety tips that will make your experience better with these valuable tools. Kickback happens when the saw blade binds or stalls suddenly in the wood and the saw gets driven back toward you. In the comments field, feel free to share any close calls or other tips you might have regarding kickback or circular saw safety.
Overusing a saw results in the overheating of saw blades. Overheating might be the result of using a dull or edgeless blade, extensive rubbing of the saw on the board, using the saw so abruptly or so slowly and improperly adjusted saw. The circular saw consists of two handles i.e., front and back.
One of the most common causes of kickback occurs when the saw has not reached its full speed yet and you work the piece against it. Another major cause of kickback is not having a firm hold and control over your circular saw. It’s always a good idea to have one finger on the saw trigger at all times when using the saw, then if kickback is likely or happens you can release your finger and the saw will stop.
circular saw jig repeatable cuts Related Question:
What tool can improve the process of making repetitive cuts?
So, whether you’re crosscutting big stock or little tiny workpieces, or making repetitive cuts or angled cuts. A crosscut sled can improve your safety and accuracy at the table saw.
What is miter box used for?
A mitre box or miter box (American English) is a wood working appliance used to guide a hand saw for making precise cuts, usually 45° mitre cuts. Traditional mitre boxes are simple in construction and made of wood, while adjustable mitre boxes are made of metal and can be adjusted for cutting any angle from 45° to 90°.
Can I use a circular saw as a miter saw?
You can make crisp, accurate bevel or miter cuts with a circular saw but it’s tricky. The blade guard can stick, making it tough to get started. And because the blade is angled, it’s more difficult to follow a line accurately without twisting the saw and possibly binding the blade.
Can a miter saw make straight cuts?
Power miter saws are designed to make angled cuts for moulding, trim work, rafters and other general carpentry applications. The saws also make straight crosscuts and, when equipped with the right blade, the versatility of a miter saw is an important part of a tool arsenal for professional carpenters as well as DIYers.
How do you cut a plywood with a circular saw without splintering?
To do so, place the best side (meaning the side of the door that will be most visible once it’s hung) face down. Then score along the edge of the cut line with a sharp utility knife. Now when you make the cut, the wood fibers will break off cleanly at the scored line, leaving a smooth, splinter-free cut.
Why is my circular saw cutting crooked?
What Causes a Circular Saw to Not Cut Straight. A faulty circular saw is likely to have issues such as an unstable blade or a warped blade edge. The problem could also be the way you operate the saw. If you do not operate the circular saw properly, it will not cut straight.
Are miter boxes accurate?
Precise: A power miter saw can lose its alignment with the material, especially when the tool is first activated. Manual miter boxes and backsaws can cut with greater precision, making them especially good for fine craftwork, such as creating picture frames.
What is a tenon saw used for?
Tenon saws are commonly used to make the tenons used in mortise and tenon joints. These saws can be used on hard and soft woods. As standard a Tenon saw will have between 10 and 14 teeth per inch (TPI), this allows you to have more control over the depth and direction of the cut you are making.
Can I use a jigsaw instead of a circular saw?
Although a jigsaw can be used for most of the tasks that a circular saw can perform, including straight cuts and cuts on a tilt, the jigsaw uses that really take advantage of the tool’s qualities are jobs such as kitchen fitting and joinery, with their frequent need for complex cuts.
Can you use a circular saw to cut baseboards?
You can also cut baseboard molding with a circular saw, but the vertical type of cut needed for baseboard requires that you tilt the base of the circular saw to 45-degrees. This is difficult and not recommended unless you are a professional because of possible kickback.
What is an advantage of the circular saw over the miter saw?
A circular saw is less expensive than a miter saw, and it’s more portable. A miter saw is safer to use than a circular saw. A circular saw can make both rip cuts along the length of a board and cross cuts across the width of a board, but a miter saw can only make cross cuts.
Why are my 45 degree cuts not lining up?
This can happen even if you get the 45 degree cut spot on. Usually if you still can’t get the miter joint to close perfectly, it’s because you either cut one piece too long (or too short), or the blade itself was not perpindicular (90 degrees) from the base.
Which is safer miter saw or circular saw?
Miter saws are easier and safer to use than circular saws. While they can only cut boards up to 12″ wide, for beginner projects this is usually enough. If you need to cut larger pieces, home improvement stores are able to do this for you, negating the need for a circular saw until tackling advanced projects.
Why does my saw not cut straight?
In general, there are several reasons why a chainsaw is not cutting straight. The chain is not sharpened on both sides, the chain’s tension isn’t adequate. The chain’s thickness is less than the groove’s width. As a result, it doesn’t stay vertical in the groove and cuts at an angle.
