More info about best chainsaw chain oil

Chainsaw bar oil is a necessary component to operating your chainsaw at peak efficiency and with safety in mind. Formula Chainsaw bar oils are either petroleum-based or bio-based. ‘ Chainsaw bar oil for winter is usually 10W. Very hot temperatures may call for a thicker chainsaw oil, in the 40W to 50W range.

To help clarify the choices, we have compiled the following list of the best chainsaw bar oil, with detailed product reviews later in the article. That’s why we picked Oregon Chainsaw Bar and Chain Oil as the best overall. When the cutting is more difficult, we recommend stepping up to Stihl Platinum Bar Oil.How We Chose the Best Chainsaw Bar Oils.

Husqvarna Premium Bar and Chain Oil is another ultra-popular premium bar and chain oil. STP Tools Bar and Chain Oil is another ‘premium’ chain bar oil that has thousands of reviews. Mag 1 Bar and Chain Oil is another cheap bar and chain oil that comes by the gallon and will not have any trouble getting the job done.

If you are looking for a lubricant that will draw out maximum power from your chainsaw’s engine, the Oregon 54-026 Chain Saw Bar And Chain Oil is what you need. If you are in forestry or you regularly work with chainsaws and are looking for a commercial grade chainsaw bar oil to lubricate your saw, you should consider trying this Makita chain/bar oil. Some folks cheap out and use motor oil instead of chainsaw bar oil.

best chainsaw chain oil Related Question:

What oil is best for chainsaw chain?

Rapeseed-based (usually called canola) oil is currently the most common environmentally compatible chain-and-bar lubricant. Vegetable-based oils are triglycerides or natural esters that come from agricultural crops.

Can you use any oil to lubricate a chainsaw chain?

Generally, chainsaws can handle a wide range of lubricants. Vegetable and canola oils work well, and automobile motor oil will too, as long as you observe the SAE ratings and use the appropriate oil weight for the season. Always use fresh, never used, oils.

Can I use 10W30 for chainsaw bar oil?

As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil. That’s because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.

What weight oil is chainsaw bar oil?

What viscosity is chainsaw bar oil? The viscosity of chainsaw bar oil can vary depending on the formula but 30W is standard. In cold weather, a thin 10W chainsaw oil may be advantageous, while very hot temperatures may require a much thicker 40W or 50W formula.

What is special about chainsaw oil?

Chainsaw bar oil has a certain level of “slickness” to it. This slickness keeps the chain spinning at a fast rate without getting slowed down by the friction that occurs when metal rubs against metal. So, if you want to use the “correct” type of bar oil in your chainsaw, consult the manual and use what it suggests.

Is chainsaw oil the same as motor oil?

Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.

What happens if you run a chainsaw without bar oil?

Without lubricant, the speed at which the chain moves over the chainsaw bar can cause some serious friction. A slowed-down chain and excessive fuel burning mean there’s a lot of friction between your bar and chain, which means a lot of heat is being produced that could do major damage to your saw.

Can I use 5w 20 for chainsaw bar oil?

They are 5w20 and 10w30, which would be best? You can but it’s not very good for the chain or the environment. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn’t fling off the chain as easily or poison your garden!

Do Electric chainsaws need bar oil?

Electric chain saws derive their power from an electric source, so they don’t need fuel to run. Most gas chain saws require a premixed gas-and-oil fuel to operate properly. Electric chain saws don’t require this added oil, but the bar and chain do need to be properly lubricated.

How much chain oil should a chainsaw use?

When to Oil Gas chainsaws use about one tank of bar and chain oil for every tank of fuel, so fill the reservoir every time you fill the tank.

Can engine oil be used as chain lube?

Can I use motor oil as a chain lube? You can use motor oil. However, it’s not recommended as this oil is too thick and won’t penetrate the inner components.

Can you use transmission fluid for chainsaw bar oil?

On occasion I’ve used tranny fluid to clean out old oil residue in old chainsaws . It works well . In addition to that tranny fluid seems to pump better on some saws with whimpy oilers in cold weather .

What does 10W30 mean?

The 10W30 designation on engine oil means that the viscosity of the oil is rated at 10W when an engine is cold, and 30 when the engine is hot. This is different than an oil labelled 5W30, which has a thinner viscosity when the engine is cold at 5W.

How important is bar oil for chainsaw?

Why use oil? You want lubrication of the actual chain against the bar. You don’t want to chain to burn – which is what might happen if there’s too much friction. Without oil, it causes frictional force on the motor in the chainsaw as well.

Why does my chainsaw blade go dull so fast?

Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.

Leave a Reply

Your email address will not be published. Required fields are marked *