Circular Saw Rip Cutting JigGet more from your circular saw with our easy-to-make ripping jig. >> 3 Circular Saw Jigs Without CategoryHalf-lap joint jig for Circ Saw and Router”Cutting on-the-money rabbets for half-lap joints with a portable circular saw and handheld router is a breeze with this two-in-one jig.” Circular Saw Cutoff Guide for Posts”When I have to use a circular saw to cuts rabbets and dadoes in posts, I use a circular saw cutoff guide that I made from scrap plywood.”
Here are our favorite 9 circular saw jig plans we found while scouring the web. This plan is a very useful resource – and as you can see, the result is very professional looking – it would probably work best with a corded circular saw rather than a cordless circular saw or a mini circular saw. Although a circular saw with a jig can’t replace a good table saw or miter saw for all applications, it can open up a whole range of new possibilities.
A circular saw is perfect for slicing up plywood and other sheet goods so they’re safer to maneuver over a table saw. Unless you use a circular saw every day trying to eyeball a straight cut across a sheet of plywood is like steering a boat without a rudder. Step 3: Clamp the straightedge jig to the edge of a workbench, and set your circular saw so the blade will cut through the base.
A circular saw crosscut jig guides a circular saw to make accurate crosscuts. By sliding the bottom plate of the circular saw against the fence, the circular saw crosscut jig can make perfectly straight cuts. To cut the parts for this DIY circular saw crosscut guide, I used my table saw and crosscut sled for this, but you could just as well use a handsaw, jigsaw or your circular saw for this.
Make a DIY circular saw crosscut jig! This simple cutting guide is perfect for making accurate crosscuts and precise miter cuts with your circular saw. You may also enjoy 4 Ways to Make Straight Cuts with a Circular Saw and How to Change a Circular Saw Blade. The common types of cuts we’ll make with our circular saw are rip cuts, crosscuts and miter cuts.
best circular saw crosscut jig Related Question:
What saw is best for making cross cuts?
A circular saw is the go-to tool for cross-cutting and ripping framing members and sheet stock like plywood.
How do you use a circular saw without a sawhorse?
In some cases, it might be better to use your circular saw without a sawhorse. If you need to make cuts without a work support, you can lay a sturdy, stationary surface under the material while making cuts.
Can I use a jigsaw instead of a circular saw?
Although a jigsaw can be used for most of the tasks that a circular saw can perform, including straight cuts and cuts on a tilt, the jigsaw uses that really take advantage of the tool’s qualities are jobs such as kitchen fitting and joinery, with their frequent need for complex cuts.
What is the most versatile saw?
The table saw, in my opinion, is the most versatile tool in the shop and should be your first major purchase. Next up is the Miter Saw. The miter saw does one thing but it does it really well. The Miter saw will cross cut wood better and faster than pretty much any other tool.
What saw is used to cut across the grain of wood?
If you’re cutting across the wood grain, a crosscut saw is the best tool. Its teeth angle backward with a beveled edge while cutting on both the push and pull strokes for a clean and accurate notch. Crosscuts can cut logs perpendicular to the grain, or you can use it in tandem with a saw hook.
Which side of the line do you cut with a circular saw?
When appearance matters, make cuts with the good side facing down, as circular saws can splinter the wood on the top side. Making your cut line on masking tape can reduce splintering. Start over if you see that you’ve veered off from the cut line instead of trying to curve your way back on track.
Why is my circular saw cutting crooked?
What Causes a Circular Saw to Not Cut Straight. A faulty circular saw is likely to have issues such as an unstable blade or a warped blade edge. The problem could also be the way you operate the saw. If you do not operate the circular saw properly, it will not cut straight.
Why can’t I cut wood straight?
Make sure that your table is secure and doesn’t wobble. If the workbench moves around while you’re cutting the wood, your cuts won’t be straight. Make sure that all the legs are even and that the table top is level. Secure the piece of wood to the table.
Are circular saw Rip Fences universal?
No, fences are not interchangeable on any circular saw. There are different widths. You can get a universal replacement set that would most likely fit.
Do I need a workbench to use a circular saw?
To get the most out of your saw, you’ll need a couple of pieces of equipment. For a start, we recommend a good work table or bench for supporting your material. There’s other ways of brace wood for cutting, but a workbench is by far the simplest and most straight forward method.
Do you need a work table for a circular saw?
You don’t need a table to use a circular saw. You can set it up on your garage or driveway floor or even your balcony and use it. In fact, I still use my circular saw on the floor when I am cutting plywood. Let’s dive into exactly how to use a circular saw without a table.
