Start the circular saw before the blade comes into contact with the worktop, then allowing the saw to do its job, rather than applying a forwards pressure, let it pull/glide through the worktop and keep a slow and controlled speed. A plunge saw is unlike a circular saw in that it has a blade that spins and cuts. Track Saws have been in the news recently with both DeWalt and Makita coming out with versions for the US. Many people don’t know that it is possible to turn a circular saw into a track saw for a fraction of the cost of a complete track saw package.
Every kitchen fitter needs a router, and you might as well get one from the UK’s best known router manufacturer. Essentially the T10 will handle all of the router jobs you’ll need to perform in the process of fitting a kitchen. Buying a twin pack of cordless tools is often the most cost-effective way to buy these tools, so that’s what we recommend Kitchen Fitters go for.
This weekend coming up, myself and a mate are going to another mates house to help install his kitchen. The end panels are pretty heavy and quite thick considering they need to be attached to the side of a wall hung cupboard.
Notes: Members cut-off dates are set at the 25th of the month before the month of despatch. If you join us on the 24th September your first issue will be the issue due the following month ie. If you join us on the 26th September then your first issue will be the issue due in December.
best circular saw blade for kitchen fitting Related Question:
Is more teeth on a circular saw blade better?
The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish.
What is the best circular saw blade for cutting worktops?
If you use a circular saw, it’s best to use a fine-toothed narrow blade with at least 40 teeth. When it comes to cutting laminate countertop, blades with carbide tips usually last longer than regular steel.
What type of blade is best for circular saw?
Mostly, a 24-tooth circular saw blade is preferred by many people, especially if you have to cross-cut lumber and sheet materials. The 24-tooth blade is good enough for you if the diameter is 7¼”. However, as the diameter increases, you should also consider looking for circular saw blades with more teeth.
How can I cut my countertop without chipping?
You can minimize the potential for chipping if you use a finish blade with lots of teeth, making sure the sharp is keen. You can further reduce the chance of chipping by using masking tape along the cut line and cutting through the tape. As with all cutting, measure at least twice and mark the line well and clearly.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
What is the most common circular saw blade size?
Blade Size Circular saws are categorized by the diameter of the blade they take. The most common and useful size for DIYers is 7 and 1/4 inches. Saws this size will cut through material more than 3-inches thick, and they also offer the widest variety of blade choices for cutting substances other than wood.
What is the best saw for cutting kitchen worktops?
Circular Saws A circular saw is the most efficient tool for cutting a worktop down to size.
What do I need to cut a kitchen worktop?
The best tool for the job, which is almost impossible to do without, is a circular saw. As long as the blade is suitable for fine cuts and sharp then it shall cut through laminated chipboard or hardwood kitchen worktops like a hot knife through butter.
What blade Do I need to cut a worktop?
For solid and veneered worktops, you need a cross-cut, fine tooth saw blade with 48 teeth. For laminated worktops, it is advisable to use the triple chip grind saw blade, also with 48 teeth. In addition to the using the right saw blade, a splinter guard is essential for ensuring a low-splinter cut.
What are the 3 basic types of circular saw blades?
They are: Rip Blades, Crosscut, Combination and Specialty blades. Ripping saw blades are designed primarily to achieve a smooth, clean and safe cut when ripping wood or cutting in the same direction as the wood grain.
Can I use a bigger blade on my circular saw?
The answer is generally this is not a great idea. A larger blade will put excess stress on the motor, and may not have enough strength to provide the cutting power at the tooth you need.
What is the difference between using a blade with 80 teeth as opposed to a blade with 18 teeth?
Cutting miters is basically crosscutting on an angle, and blades with higher tooth counts generally perform best when cutting across the grain. A blade with 80 or more teeth offers the crisp miter cuts you’re looking for.
What kind of blade do you use to cut laminate countertop?
Cutting a post-form laminate countertop to length requires a clean, straight cut. The best DIY tool for the job is a circular saw with a fine-tooth carbide blade made for laminate (the same blades are typically sold for non-ferrous metals and other types of plastics). You can also use a jigsaw with a fine-tooth blade.
What kind of blade Do I need to cut laminate countertop?
Simply put, the Festool Laminate 48-tooth saw blade is one of the best blades you can use for cutting laminate. These blades are made specifically for cutting laminate, and they will do the job on even the most robust types of laminate.
What is a HSS blade used for?
HSS Saw Blades are designed for cutting non-ferrous metal and plastic where maximum cutting life between sharpening is required . Ideal for sawing a wide variety of sizes and shapes such as extrusions, tubes, sheets, plates and some bar stock.
