Aside from selecting a circular saw blade based on factors like the number of teeth, positive-negative zero saw blades, tip style, and many other factors, you also need to select a saw blade according to the material type you will cut. Choosing a circular saw blade for cutting hardwood can be a bit confusing, given the myriads of brands and models of saw blades in the market today. Since circular saw blades come in different varieties and make, you may get confused about which saw blade to choose for ripping hardwood.
The best saw blade for ripping hardwood is a rip blade. These blades can handle ripping and crosscuts, or cuts made against the grain, because they have alternately beveled teeth like crosscut blades and FT teeth like rip blades. As long as you have the tools to rip hardwood safely, you can make a smooth rip cut while avoiding dangers like kickbacks.
With the best circular saw blade for hardwood, your work will be fast and smooth. Get familiar with the list of the prime blades for the circular saw. Back to menu How to pick circular saw blade for hardwood.
A circular saw blade is a special type of blade that works well with circular saws and is particularly designed to cut through different materials with ease. The circular saw blade is reinforced and strengthened to provide the smooth and optimum performance that you experience from your circular saw, and once the blade inside your saw becomes warped or worn out, you can replace it with a similar one to ensure that you keep getting clean and precise cuts every time you use it. Most of the other blades often get overheated and warped, but this isn’t something you experience with the circular saw blade.
best circular saw blade for ripping hardwood Related Question:
What circular saw blade is best for hardwood?
The IRWIN Tools MARATHON Carbide Corded Circular Saw Blade is a heavy-duty and premium quality circular saw blade that you can use for cutting through different kinds of wood, including hardwood and plywood. It has a diameter of 7¼” and 24 spaced and razor-sharp construction-grade carbide-tipped teeth.
What kind of blade do you use to rip wood?
The best saw blade for ripping hardwood is a rip blade. This blade is specially made for cutting through wood fibers, so it will cut through hardwood easily and leave a clean edge. Rip blades usually have 10 to 40 flat-topped (FT) teeth, which is a comparatively small number, but it will move through the grain quickly.
How many TPI do you need for hardwood?
If you’re looking to cut wood or other soft materials, you’ll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable.
Is more teeth on a saw blade better?
More teeth means a smoother cut, fewer teeth means that the blade removes more material. Crosscut blades have more teeth and make smoother cuts across the grain of the material, rip blades have fewer teeth, are optimized to cut with the grain, and remove a lot more material.
What is a 40-tooth saw blade used for?
Deep gullets provide good chip removal. Crosscut blades, made for cutting across the woodgrain (across the face of a board), have between 40 and 80 teeth and are designed for clean cuts. Smaller gullets separate the teeth. Combination blades can make both rip cuts and crosscuts.
Can you use a circular saw for rip cuts?
In most cases, a table saw is a better choice for ripping lumber than a circular saw. But if you don’t have a table saw handy, and the rip cut doesn’t have to be precise, then a circular saw works fine. The trick is to hold the board in place while you rip it.
How many teeth blade for ripping?
Ripping: 10-inch blades with 24-30 teeth and 12-inch blades with 40 or fewer teeth. Crosscutting: 10-inch blades with 60 teeth and 12-inch with 80 teeth.
What is a 60 tooth saw blade used for?
A crosscut blade, on the other hand, is designed to produce a smooth cut across the grain of the wood, without splintering or tearing. This type of blade will usually have 60 to 80 teeth, and the higher tooth count means that each tooth has to remove less material.
What is the purpose of the gullet on a saw blade?
Gullet. The space between the teeth and the body of the saw. This space holds the sawdust while the teeth are in the cut. The gullet must be large enough to hold all the sawdust produced.
What is 14 TPI for cutting?
8-14 TPI blades are capable of cutting wood and the occasional nail. Demo blades fall into this category. 14-24 TPI is the range of metal cutting, PVC cutting and finish cut blades. The blades cut slowly, but leave being a very smooth edge.
What is a 180 tooth saw blade used for?
Designed for cutting a variety of materials, including plywood, vinyl siding, and plastic, the CRAFTSMAN 10-in 180-tooth high-speed steel miter/table saw blade set is a must-have for your workshop.
What is 18 TPI for cutting?
Blades 12-18 TPI are typically used for metal and denser materials as well as finish cuts in wood. The 18-24 TPI range is almost always used for metal cutting. Pro Tip: Always keep 3 teeth in contact with the material being cut.
What is the best saw blade for ripping?
Ripping solid wood: Use a 24-tooth to 30-tooth blade. You can use 40-tooth to 50-tooth multipurpose blade as well, but it will take longer. Cross-cutting wood or sawing plywood: Use a 40-tooth to 80-tooth blade.
Why does my saw blade burn the wood?
A dull blade will make it hard to cut quickly, and the slower the feed rate of the saw, the more friction against the wood and the greater the likelihood of scorch marks. Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty.
How many teeth should a circular saw plywood blade have?
A 40-tooth blade works fine for most cuts through plywood. Blades with 60 or 80 teeth should be used on veneered plywood and melamine, where the thin veneers are likely to blow out on the underside of the cut, a characteristic known as tearout. MDF requires even more teeth (90 to 120) to get the cleanest cut.
