Ensure straight cuts with these two, simple cutting guides. With these two saw guides, you can use your circular saw to make cuts that rival a table saw’s for speed and accuracy. Like the straightedge guide, the crosscut guide is customized to your saw so you can simply line up the edge of the guide with your cutting mark and clamp it.
I planned to replace it once I settled into my new house, but when the time came to build a room divider/bookshelf unit, I decided to build a couple of my own makeshift circular saw guides instead. The guides are compact and store easily. It’s quick, safe and especially useful when you need to cut a sheet of plywood down to size or to rip a long straight edge on a wide piece of lumber to prepare it for further ripping on a table saw. The only difference is that I put a 1 x 2 stop on the bottom, perpendicular to the 1 x 4 guide, which automatically squares the guide across the piece being cut.
Here are our favorite 9 circular saw jig plans we found while scouring the web. This plan is a very useful resource – and as you can see, the result is very professional looking – it would probably work best with a corded circular saw rather than a cordless circular saw or a mini circular saw. Although a circular saw with a jig can’t replace a good table saw or miter saw for all applications, it can open up a whole range of new possibilities.
best circular saw guide diy Related Question:
Can you use a guide rail with a circular saw?
A Guide Rail is designed to be used with a Circular Saw for creating precise and straight cuts every time.
Can I convert my circular saw to a track saw?
There has been a lot of buzz about Track Saws with both DeWalt, and Makita finally coming out with versions for the USA. But I bet many people don’t know that you can turn just about any circular saw into a track saw for a fraction of the cost of a complete track saw package all with a kit from EurekaZone.
Are guide rails universal?
The YouTool Guide Rail is universally suitable for almost all brands of saw, and is available up to 5 meters long.
Can you use Makita circular saw on guide rail?
Enables use of DHS680 Circular Saw with the Makita guide rail system. This adaptor can be attached to Makita circular saws, which allows you to use the circular saws with the Makita SP6000 guide rail system for precise, straight routing cuts.
Whats the difference between a circular saw and a skill saw?
Circular Saws vs. All skill saws are circular saws. They all have circular blades that spin rapidly to bite through wood. However, not all skill saws are circular saws. Circular saws can be gas-powered, have sidewinder or hypoid designs, or even be fixed to radial arms, which skill saws commonly aren’t.
What is a rip fence used for?
A rip fence provides a cutting guide that runs from the front of the table to the back. This is parallel to the cutting plane of the blade. A Miter gauge holds and guides material at a specific angle to make a precise cut. The locking mechanism pivots from 45 to -45 degrees and slides into a slot (miter slot).
When cutting plywood with a circular saw which side is up?
Also note that a circular saw cuts on the upstroke, which often splinters the top edge (veneer) slightly. The bottom edge usually remains splinter-free. So always cut plywood with the good side down.
How many teeth do you need for plywood?
Cross-cutting wood or sawing plywood: Use a 40-tooth to 80-tooth blade. You can use a 40-tooth to 50-tooth general purpose blade as well. Joinery work: Use a 40-tooth to 50-tooth all-purpose combination blade. Cutting MDF and man-made materials: Use a 50-tooth to 80-tooth blade.
Can you use a DeWalt circular saw on a track?
The DWS5022 is a reversible 1.5 metre track for use with the DWS520 plunge saws, as well as other DeWalt circular saws and routers. It features a support rail which runs up the middle and distributes weight effectively to deliver an accurate cut.
Can a plunge saw replace a circular saw?
A plunge saw has a different design which removes the need for a conventional retractable blade guard, as the blade is enclosed within the machine. This ensures multiple benefits versus the traditional circular saw including: The blade can be plunged at any point into the material you are cutting.
Can a track saw be used without the track?
Yes, you can use a track saw without a track. The saw will function the same as a circular saw when used this way. The Festool track saw even has a separate depth setting for use without the track.
Is it a guardrail or guide rail?
Guard rail is more common, but guide rail is acceptable. According to the US Federal Highway Administration, “The terms guardrail and guiderail are synonymous, and are used in different regions around the country.”[4] Guide rail and guard rail are intended to steer and “guide” vehicles back onto the road.
Why is my circular saw burning the wood?
Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty. If wood pitch resins build up behind the teeth of the blade, the cutting speed will slow down, increasing the chances for burns. Commercial blade cleaners are sold for this purpose.
Can a circular saw cut a 4×4?
Circular Saw. A circular saw is one of the best means of cutting a 4×4 post. Most people own a circular saw, its portability makes it easy to cut 4x4s from the ground, and they can make precision cuts by using a relatively simple trick.
Which cut is when you cut a straight 90 degree across the grain?
A crosscut is a straight, 90-degree cut that cuts across the grain of the wood. Usually, that means turning long boards into shorter ones. On a table saw, you will usually use a miter gauge to make crosscuts. It’s the most basic cut you can make.
