A circular saw is perfect for slicing up plywood and other sheet goods so they’re safer to maneuver over a table saw. The first time you try to heave a 100-pound sheet of MDF up and onto your saw, you’ll see just how valuable a little circ saw can be. Unless you use a circular saw every day trying to eyeball a straight cut across a sheet of plywood is like steering a boat without a rudder. The fence backs up your saw base and keeps the blade tracking straight through the cut. Make your fence a couple of inches wider than the distance your circular saw motor overhangs its base. Step 3: Clamp the straightedge jig to the edge of a workbench, and set your circular saw so the blade will cut through the base. Step 3: Trim the overhanging end of the stop to the correct offset for your circular saw.
Make this simple circular saw jig and every cut will be perfectly straight! Just clamp the jig to your board and slide the circular saw along the fence. Be sure to keep the saw flat on the circular saw jig and slide it slowly along the edge. Of course, a table saw would make this cut in a fraction of the time it takes to set up this circular saw jig.
Here are our favorite 9 circular saw jig plans we found while scouring the web. This plan is a very useful resource – and as you can see, the result is very professional looking – it would probably work best with a corded circular saw rather than a cordless circular saw or a mini circular saw. Although a circular saw with a jig can’t replace a good table saw or miter saw for all applications, it can open up a whole range of new possibilities.
Circular Saw Rip Cutting JigGet more from your circular saw with our easy-to-make ripping jig. >> 3 Circular Saw Jigs Without CategoryHalf-lap joint jig for Circ Saw and Router”Cutting on-the-money rabbets for half-lap joints with a portable circular saw and handheld router is a breeze with this two-in-one jig.” Circular Saw Cutoff Guide for Posts”When I have to use a circular saw to cuts rabbets and dadoes in posts, I use a circular saw cutoff guide that I made from scrap plywood.”
how to use circular saw jig Related Question:
Which is better circular saw or jig saw?
If you’re constantly needing to rip through boards, you know a jigsaw won’t cut it, so a circular saw is the more preferred option for you. If you’re doing intricate shapes and complex number cutting – a circular saw won’t help you there!
Why can’t I cut wood straight?
Make sure that your table is secure and doesn’t wobble. If the workbench moves around while you’re cutting the wood, your cuts won’t be straight. Make sure that all the legs are even and that the table top is level. Secure the piece of wood to the table.
Can jigsaw cut 2×4?
The secret to doing straight cuts in 2×4 lumber is to guide the jigsaw steadily, in one go. As long as the pace is slow and consistent, you will be fine by allowing the blade to do the work of cutting for you – keep the focus on following the cutting line as you control the speed and pace of the cut.
Can a jigsaw cut straight?
The jigsaw can be used to make both straight and curved cuts in a wide variety of materials, including wood, particleboard, plywood, plastic, metal, even ceramic tile. It’s also safe and easy to use, which is why it’s often the very first power saw a new DIYer buys.
Does a circular saw cut straight?
Despite its name, the portable circular saw (or any circular saw, for that matter) cuts only straight lines. The name actually refers to the shape of its blade.
Which cut is when you cut a straight 90 degree across the grain?
A crosscut is a straight, 90-degree cut that cuts across the grain of the wood. Usually, that means turning long boards into shorter ones. On a table saw, you will usually use a miter gauge to make crosscuts. It’s the most basic cut you can make.
What is the space between two protruding teeth on a saw blade called?
Gullet (handsaw) The space between a saw’s teeth, where the saw dust is carried out. It is an equilateral triangle, just like the file that shapes the teeth.
How do you cut wood neatly?
To make this cut, use a miter saw or a table saw for best results. A table saw will let you cut wider pieces of wood. Avoid using a band saw, as crosscutting wood is more strenuous on a blade and a band saw is more likely to burn the edges of the wood or result in rough cuts.
Why do circular saws cut upwards?
The saw’s motor runs the blade rotation in a way that the circular saw teeth direction points up as it enters the wood you’re cutting. It’s intentional to create the most stable, accurate, and safe cutting. As the blade teeth hit the material, they rip from the bottom through the top.
How can I make my circular saw more accurate?
Using a Straightedge for Accurate Circular Saw Cuts Measure the exact distance from the edge of the circular saw’s shoe to the same side of the blade. Once you have that measurement, add it to your original marks and make a new line. Set the straightedge on the new marks, clamp it down, and make your cut.
