Most of us have been there at some pointstaring at a blade in one hand and a saw in the other wondering what the correct circular saw blade direction is. Getting the circular saw blade teeth going the correct direction is what’s at the heart of the matter. The saw’s motor runs the blade rotation in a way that the circular saw teeth direction points up as it enters the wood you’re cutting.
When I first started using circular saws, what I knew about the circular saw blades was this: how many teeth the blade has and the size of the blade. Back in the spring, I had the opportunity to peer over the shoulder of a demo guy at a Diablo circular saw blades booth at a Home Depot event and was mind-blown at how he was slicing through thick metal like the circular saw blade was a hot knife through butter. Before jumping into which way to insert a circular saw blade when changing the blade, let’s first talk about which direction the blade of the saw actually cuts.
A challenge when determining the right direction for table saw teeth is that the saw conceals most of the blade, making it hard to see the teeth. Hand saw: If you’re using a non-motorized hand saw for cutting wood, the blade’s teeth should always point in a downward direction. If you’re not sure which direction the teeth on your saw blade should point, contact an expert on the team at Luxite Saw.
Learn how to change a circular saw blade! We’ll see which direction to install the blade, how to tighten the blade, what size blade you need and more! Please refer to your owner’s manual for how to change the blade on your specific circular saw. Now we know how to change a circular saw blade! We learned which direction to install the blade, how to tighten the blade, what size blade we need and more!
which way does circular saw blade go Related Question:
Which way do you install a circular saw blade?
When installing a new blade, make sure the teeth are pointing downward to enable a clean cut through the workpiece. Upward-facing teeth can cause a severe injury to the operator.
Can you put a circular saw blade on backwards?
When cutting vinyl siding with a circular saw, install a fine-toothed blade backwards on the saw for a smoother, cleaner cut, especially in cold weather (when the material is brittle).
Which way should teeth face on circular saw?
The teeth should be cutting UPWARDS, in a clock-wise direction. You’ll also notice that when your blade is installed correctly, the teeth will be pointing upward. Remember: circular saws (as most saws) cut on the upward stroke.
Why do circular saws cut upwards?
The teeth of circular saw blades are intended to cut upwards into the material from below and this is for safety purposes. It is important that you should not spin them in a different direction just like you spin a table saw blade.
How do I know if my circular saw blade is backwards?
Correct Circular Saw Blade Direction However, saw and blade manufacturers make it a little easier for you. When you look at the saw’s blade cover there’s an arrow to let you know which direction the motor turns. On the blade, there’s usually a directional arrow as well.
Is there a left and right handed circular saw?
Here’s a hint—it’s not by accident that manufacturers don’t call these “right-handed” and “left-handed” saws. Our Pros will tell you that it’s all about what you get used to and are comfortable with. In fact, most have both types of saws for different applications.
When using a circular saw good side up or down?
When appearance matters, make cuts with the good side facing down, as circular saws can splinter the wood on the top side. Making your cut line on masking tape can reduce splintering. Start over if you see that you’ve veered off from the cut line instead of trying to curve your way back on track.
Which way should a table saw blade face?
A table saw blade spins towards you, from the top downward, so the sharp blades must face the front of the table saw and not the back. Tighten the arbor nut snugly.
Can you reverse a saw blade to cut metal?
Yes – a circular saw blade can be accidentally mounted on the saw backwards – but it is a mistake you will only make one time because you will find out the instant you try to cut a piece of wood. It will not cut and you will be embarrassed at your mistake.
Why are Dewalt circular saws left-handed?
The placement of the cordless saw blade, on the left side, gives you a clearer line of sight when you cut. The reason for this is because the main bulk of your circular saw is not blocking your view. Cordless circular left-handed saws provide you better movability.
Does Dewalt make a left-handed circular saw?
1. Dewalt Left Handed Circular Saw. Dewalt left-handed circular saw, corded, has a powerful 460 MWO, 5,150 RPM motor that provides more than enough power and speed to make difficult cuts without a problem. The material of the base plate is Magnesium which makes it strong and lightweight.
When cutting wood should the good side be up or down?
Splinters and tear-outs occur where the blade breaks through the wood. That’s the bottom side when plunge-cutting narrow boards, so it’s best to cut narrow boards with the “show” side face up.
Do you cut finish side up or down?
To get the cleanest cut possible remember these tips: Whenever you run wood through a Table saw, always make sure that your finished side is up. Do the exact opposite when you are using your Power saw. The finished side of your wood must be at the bottom.
Why does my circular saw burn the wood?
A dull blade will make it hard to cut quickly, and the slower the feed rate of the saw, the more friction against the wood and the greater the likelihood of scorch marks. Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty.
How do you cut straight with a circular saw without a guide?
To ensure a straight cut, press the saw firmly against the straightedge as you push it along. Clamp a perfectly straight board or metal straightedge to a sheet of plywood to make cabinet-quality straight cuts.
