If a chainsaw cuts at an angle rather than cutting straight, then the problem most certainly lies in the guide bar and chain assembly. Adjust the chainsaw bar: If possible, adjust your chainsaw bar on a bench before continuing. Use a bar cleaner handle: A bar cleaner hook tool removes debris stuck in the bar’s rails.
Your chain will have links on both sides of the chain. As I mentioned earlier, the chain is most likely the root cause of your problem, but if that’s not it, then it could also be your chainsaw bar. Use your gauge tool to clean the oil hole on both sides of the bar, to keep your chain running smoothly.
Most of the time when a saw won’t cut straight, it’s caused by a problem with the saw chain. Most of the time, when a saw won’t cut straight, the chain is the culprit. Since a saw chain is a “Team” of cutter teeth, the cut will pull in the direction of the side whose cutter teeth take the biggest bites.
Basically, if the teeth of your chain are sharp and they’re sharpened at the correct angle, your chainsaw will cut straight. If your chainsaw is not cutting straight, chances are your chain is dull on one side. As long as you keep your chain sharp and take the time to occasionally flip your bar over, you can eliminate those annoying angled cuts that make cutting firewood difficult and unsafe.
I’ve also seen chains that were brend new at the start of the day, cutting cut circles by the end of the day due to someone hitting dirt/sand/rocks or pushing the chain way longer then they should have. If the chain is damaged like it would be if its cutting arcs take the chain to a saw shop to get the chain sharpened. Bottom line, if sharpened at the right angles, and if sharp……it will cut straight.
chainsaw is not cutting straight Related Question:
Why is my chainsaw cutting at an angle?
One major reason a chainsaw curves to either the right or left during a cut is that it was unevenly sharpened. The unequal teeth of the chain cause it to take a different-sized bite into the wood. What is this? The uneven sharpness of the chain is mainly due to manual sharpening, especially with the use of a file.
Why does my saw not cut straight?
The primary reason why a miter saw might not cut straight is an inability to clamp the material down. The machine is designed to pull the material towards the blade during each cut, and if there’s a malfunction in this process, it might result in inaccurate cuts. Other reasons are: damaged blade.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
Why does my chainsaw smoke when cutting?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
How do you fix uneven wood cuts?
Usually, the fixing method is to fill the gap with lots of glue and wood filler. But here’s a better method, take a small piece of wood and put it in the gap. Then glue it in the right place and clamp it to the side of the tenon. Make sure that you have arranged the grain of the wood.
How do you tension a chainsaw blade?
Loosen the bar nuts on the side of the chainsaw guide bar. Insert a screwdriver or chainsaw scrench into the Intenz slot of the guide bar. Turn the screwdriver or scrench clockwise to move the guide bar forward to proper chain tension. Perform a “snap” test to ensure proper saw chain tension.
How often should you flip the bar on your chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
Does wet wood dull a chainsaw?
Does Cutting Wet Wood Dull a Chainsaw? Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. True, it is not wet with water.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
Why is my chainsaw burning the wood?
Your chainsaw burns wood because of poor lubrication Lubrication allows the mechanical parts to coordinate much better by avoiding a phenomenon of friction which risks causing traces of burns. This is one of the main reasons that your appliance gives off too much heat and that the wood burns.
Can you fix a bent chainsaw bar?
Solid body bars with replaceable noses can be straightened by hammering with the bend peak up on a flat anvil. Laminated bars need a piece of rubberized belting of approximate 1/4″ thickness between bar and anvil to properly hammer straighten .
Can you straighten a bent chainsaw blade?
Re: Straighting a bent chain If you just have a few drive links twisted a vice will usually straighten them out . If however you bent the drivers up in the chain it’s self it might not be a bad idea to just change them rather than take a chance of breaking a chain .
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
Can you cut with both sides of a chainsaw?
A chainsaw is one of the most versatile tools you can own, but it cuts both wood and flesh equally well.