If you do not need a large-scale sawmill, there’s absolutely no need to spend more money on one and you would be better off with a chainsaw mill. In order for you to be able to fit your chainsaw into the sawmill, it must be compatible or else it won’t fit. Before you proceed with purchasing a sawmill, you need to make sure that your chainsaw and the sawmill are actually compatible, unless you plan on purchasing an additional chainsaw.
If you are in a hurry and just want to find out what the best chainsaw mill is, then we recommend the Granberg ChainSaw Mill G777 as the best one. Finally, you need to find the best chainsaw mills for the money that is compatible with the type of chainsaw you own. Heavier chainsaw mills do not make the best portable chainsaw mill, so if you cut logs deep in the woods, a lightweight mill will be a better choice.
To make choosing the best chainsaw mill for you easier, we read through hundreds of customer reviews and pored over technical documents for many of the favorite chainsaw mills currently on the market. Our buying guide gives you more information about how to choose the chainsaw mill that is right for your needs, and finally, we announce our overall top-rated chainsaw mill. While some more expensive chainsaw mills come with a guide track to help you make the perfect cuts, others are designed to simply approximate a level cut and you may need to build your own custom guides.
Chainsaw mills are sometimes called Alaskan mills because it’s in that rough, wild country where these things first caught on. Dollar-for-dollar, Granberg’s G777 chainsaw mill is the best investment in the class of chainsaw mills we reviewed. RCTEC’s 24-inch chainsaw mill is another chainsaw mill that works best as a second mill in your inventory.
chainsaw cutting guide reviews Related Question:
Are chainsaw mills worth it?
A chainsaw mill is one of the most efficient and effective tools when it comes to converting wood into lumber. Lumber is a very effective raw material that can be used for a variety of purposes. Be it for firewood or be it for construction purposes, you can certainly utilize lumber for whatever you need.
What size chainsaw do I need for an Alaskan mill?
Most Alaskan mills require at least 3 inches extra at the end of the bar for attachment. I also recommend going with a saw with an engine size of at least 60cc for smaller logs and softer woods. A minimum of 90cc would be best though.
How well do chainsaw sawmills work?
A chainsaw has a saw kerf right around 3/8 of an inch, which means it is very inefficient and produces a lot of sawdust. For these reasons, a chainsaw mill is definitely not to be used for optimizing the amount of lumber that you can yield from a log.
How fast does a chainsaw mill cut?
Cutting speeds can vary from 8 feet a minute in narrow softwoods, to 1-1/2 feet a minute in wide hardwoods.
What CC is Alaskan mill?
In general, you will need at least 50cc to run our smallest mill (G777). The more powerful your saw, the easier your milling experience is going to be.
How long does it take to mill a log with a chainsaw?
Milling logs with a chainsaw mill isn’t a quick job. While the length of time it takes depends on the power of your chainsaw, your own skill level, and the size of the log you are cutting, as a rough guideline, it will take anywhere between 10 and 25 minutes to make each full cut.
Can I cut horizontal with a chainsaw?
Make a horizontal cut as close to the ground as possible. Go slow and keep the chainsaw steady. If you find that the chainsaw chain is getting pinched, use a wedge to keep a separation between the top and bottom layers of wood.
Can you use a chainsaw to split logs?
It isn’t recommended to split the logs using the chainsaw due to safety concerns, however, cutting the wood down to the appropriate size is ideal for the chainsaw.
What is a chainsaw guide bar?
Guide bars provide precise guidance to the chainsaw with minimal friction loss. They have to take on the toughest jobs without warping. The two basic types − the Rollomatic and Duromatic − have been designed to handle different requirements and areas of application. Rollomatic bars are ideal for everyday use.
What is a ripping chain?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.
How do you tell if a chain is a ripping chain?
There are often two distinct features on a ripping chainsaw chain over a standard cross-cut chain. Ripping chains are semi-chisel or micro-chisel with a low cutting angle between 5-10 degrees or each cutter, opposed to the deeper cutting angle on a regular crosscut chain of around 25-35 degrees.
Are chainsaw mills safe?
Re: chainsaw mill safety Be careful using the mini mill down in front of your leg because if the chain breaks you`ll be chain whipped if your bar isn`t buried in the log. Wear eye protection along with the face shield. Make sure the logs are secure before milling them.
Is it worth milling your own lumber?
Milling your own lumber can produce quality material for a fraction of the price of a lumber dealer. In fact, if you purchase your own mill, like I have, you can actually make a profit off of it by selling lumber to other woodworkers and by offering to mill other people’s logs.