Diablo D1080N Non-Ferrous Metal & Plastic Cutting Saw Blade Laser Cut Stabilizer Vents Trap Noise And Vibration Keeping It Cool And Reducing Blade Warp.Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight. The IVY Classic 7-1/4 circular saw blade is well known for its swift cut, and the blade is specially designed for cutting plastic and aluminum. We recommend this blade for those looking for the best circular saw blade for cutting plastic at the best price tag.
what circular saw blade for plastic Related Question:
What blade is best for cutting plastic?
Cutting Thick Sheets of Plastic To make straight cuts on thicker sheets of acrylic and polycarbonate plastic (greater than ⅛ inch thick), you’ll need to use a table saw or circular saw. Use blades designed specifically to cut plastic, which are often packaged as “No Melt” blades.
What TPI is used to cut plastic?
For cutting 1⁄ 4 ” or thinner acrylic, use a 10–14-tpi (teeth per inch) blade. With thicker plastics, a 6–8-tpi blade works well.
Can you cut plastic with a saw?
Cut through plastic with a fine-toothed saw. Using a saw with fine, small teeth will allow you to cut through thick plastic precisely and without destroying the plastic itself. While all saws will be able to cut through plastic, saws with large teeth will leave the plastic torn or shredded.
Can a circular saw cut PVC?
Circular saws can easily cut PVC provided that it is mounted with the right blade. However, it should be kept in mind that cutting PVC with a circular saw is a lot different than cutting wood. Just as I mentioned in the above paragraph, your circular saw can easily cut through PVC pipes without any issue.
How do you cut plastic without cracking it?
Using a Hand Saw The important thing is to use a fine-toothed blade. You can use a hacksaw, hand jigsaw, or fine-toothed saw. Although it will take some work and muscle power, a hand saw is perhaps the best way to get a clean cut without breaking, snapping, or melting your plastic.
What is 18 TPI for cutting?
Blades 12-18 TPI are typically used for metal and denser materials as well as finish cuts in wood. The 18-24 TPI range is almost always used for metal cutting. Pro Tip: Always keep 3 teeth in contact with the material being cut.
Can a diamond blade cut plastic?
All of the diamond particles are on the exterior cutting edge of the blade, with no metal-diamond mixture. Depending on the manufacturer’s recommended blade application, vacuum brazed blades will cut a wide variety of material including concrete, masonry, steel, various irons, plastic, tile, wood and glass.
Does cutting PVC dull saw blade?
Absolutely not!! Go for it, but hang on tight to the pipe, it has a tenancy to roll in a chop saw. Also watch out for flying pieces, especially when making small cuts (eg <2" off the end) as the blade can send the offcut a pretty good distance.
Can you cut plastic with a miter saw?
The more teeth a blade has, the better for plastic. But, you said this will be a “one-off” job, you shouldn’t have any issues. If you have a band saw, this would work even better. Far better than blades made specifically for plastics.
Is more TPI better?
Woodworkers quickly learn that the number of teeth-per-inch (TPI) on the blade has a big impact on the quality of a cut. The general rule of thumb is “the more TPI, the smoother the cut.” The true answer, however, is just a little more complicated than that, as you’ll learn once you understand how saw teeth work.
