Make a DIY circular saw crosscut jig! This simple cutting guide is perfect for making accurate crosscuts and precise miter cuts with your circular saw. You may also enjoy 4 Ways to Make Straight Cuts with a Circular Saw and How to Change a Circular Saw Blade. The common types of cuts we’ll make with our circular saw are rip cuts, crosscuts and miter cuts.
A circular saw is perfect for slicing up plywood and other sheet goods so they’re safer to maneuver over a table saw. Unless you use a circular saw every day trying to eyeball a straight cut across a sheet of plywood is like steering a boat without a rudder. Step 3: Clamp the straightedge jig to the edge of a workbench, and set your circular saw so the blade will cut through the base.
Not everyone has a table saw and miter saw, and even if you do, this handy circular saw crosscut and rip station will help you do some of the things a table saw and miter saw will. Cut the rip fence to the length between the front and back fence. Push a scrap piece of red oak up against the slide and then push the rip fence up against the scrap piece.
Here are our favorite 9 circular saw jig plans we found while scouring the web. This plan is a very useful resource – and as you can see, the result is very professional looking – it would probably work best with a corded circular saw rather than a cordless circular saw or a mini circular saw. Although a circular saw with a jig can’t replace a good table saw or miter saw for all applications, it can open up a whole range of new possibilities.
circular saw crosscut jig Related Question:
What does cross cutting do?
Cross-cutting is an editing technique most often used in films to establish action occurring at the same time, and often in the same place. In a cross-cut, the camera will cut away from one action to another action, which can suggest the simultaneity of these two actions but this is not always the case.
How do you use a circular saw without a sawhorse?
In some cases, it might be better to use your circular saw without a sawhorse. If you need to make cuts without a work support, you can lay a sturdy, stationary surface under the material while making cuts.
Which side of the line do you cut with a circular saw?
When appearance matters, make cuts with the good side facing down, as circular saws can splinter the wood on the top side. Making your cut line on masking tape can reduce splintering. Start over if you see that you’ve veered off from the cut line instead of trying to curve your way back on track.
Why is my circular saw cutting crooked?
What Causes a Circular Saw to Not Cut Straight. A faulty circular saw is likely to have issues such as an unstable blade or a warped blade edge. The problem could also be the way you operate the saw. If you do not operate the circular saw properly, it will not cut straight.
What is a cross cutting jig?
What is a Crosscut Jig? A crosscut jig helps us make precise crosscuts and miter cuts. It acts like a fence or cutting guide for our circular saw. The base plate of the saw rides against the fence of the jig. The fence forces the saw to make cuts exactly where we want them.
Can I use a jigsaw instead of a circular saw?
Although a jigsaw can be used for most of the tasks that a circular saw can perform, including straight cuts and cuts on a tilt, the jigsaw uses that really take advantage of the tool’s qualities are jobs such as kitchen fitting and joinery, with their frequent need for complex cuts.
Why can’t I cut wood straight?
Make sure that your table is secure and doesn’t wobble. If the workbench moves around while you’re cutting the wood, your cuts won’t be straight. Make sure that all the legs are even and that the table top is level. Secure the piece of wood to the table.
What is an example of cross cutting?
For example, in Ferris Bueller’s Day Off, Ferris pretends to be bedridden while talking to his father on the phone, but really he’s sitting at his computer, pressuring his buddy Cameron to come over. To build suspense. Crosscutting can bring viewers to the edges of their seats.
What is the most common function of cross cutting?
Cross cutting is most often used to build anticipation and to show a large scale operation at work. If you have a big scene where a group of thieves carry out a heist, you can build rhythm, momentum, and anticipation.
What’s the difference between cross cutting and intercutting?
Crosscutting is a general term for any time a scene is intercut with another, while parallel editing refers to instances where two or more shots are depicting parallel actions happening simultaneously.
Do I need a workbench to use a circular saw?
To get the most out of your saw, you’ll need a couple of pieces of equipment. For a start, we recommend a good work table or bench for supporting your material. There’s other ways of brace wood for cutting, but a workbench is by far the simplest and most straight forward method.
