For cutting across the grain only, you’ll want a crosscut saw blade. The value of using a saw blade for the specific cut type you’re doing is that the blades designed for those specific cuts will cut smoother and faster, and they also will last longer. As these saws are typically used for crosscutting, choose a blade with a higher tooth count.
So we’ve summoned all of our wisdom and powers of brevity to bring you this useful guide to choosing the right circular saw blade. Choosing the right circular saw blade for rip cuts might be even more important. We hope this article about choosing the right circular saw blade cuts through the confusion so you can select the best accessory for the job.
circular saw number of teeth Related Question:
How many teeth should my circular saw have?
A 40-tooth blade works fine for most cuts through plywood. Blades with 60 or 80 teeth should be used on veneered plywood and melamine, where the thin veneers are likely to blow out on the underside of the cut, a characteristic known as tearout. MDF requires even more teeth (90 to 120) to get the cleanest cut.
Is it better to have more or less teeth on a circular saw?
The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish.
Is more teeth on a saw blade better?
More teeth means a smoother cut, fewer teeth means that the blade removes more material. Crosscut blades have more teeth and make smoother cuts across the grain of the material, rip blades have fewer teeth, are optimized to cut with the grain, and remove a lot more material.
What is a 180 tooth saw blade used for?
Designed for cutting a variety of materials, including plywood, vinyl siding, and plastic, the CRAFTSMAN 10-in 180-tooth high-speed steel miter/table saw blade set is a must-have for your workshop.
What is a 140 tooth saw blade used for?
OVERVIEW. The CRAFTSMAN 7-1/4-in 140-tooth carbon circular saw blade is made for cutting plywood, OSB and plastic. With a fully hardened and fully flattened plate, along with 140 precision-ground teeth, this blade delivers precise cuts without chips or splinters in the wood or cracks in vinyl and plastic materials.
Can I use a larger blade on my circular saw?
The answer is generally this is not a great idea. A larger blade will put excess stress on the motor, and may not have enough strength to provide the cutting power at the tooth you need.
Do all circular saw blades fit all saws?
Circular saw blades are designed for use with miter saws, table saws, radial arm saws, cut-off saws and standard circular saws. Many circular blades can be used interchangeably between devices.
How many teeth do you need for plywood?
Cross-cutting wood or sawing plywood: Use a 40-tooth to 80-tooth blade. You can use a 40-tooth to 50-tooth general purpose blade as well. Joinery work: Use a 40-tooth to 50-tooth all-purpose combination blade. Cutting MDF and man-made materials: Use a 50-tooth to 80-tooth blade.
What is a 60 tooth saw blade used for?
A crosscut blade, on the other hand, is designed to produce a smooth cut across the grain of the wood, without splintering or tearing. This type of blade will usually have 60 to 80 teeth, and the higher tooth count means that each tooth has to remove less material.
How many teeth per inch are on a hack saw blade?
Hacksaw blades are distinguished by the pitch (frequency) of their teeth. These can vary from three relatively large teeth per inch (TPI) through to 32 TPI, ideal for very fine cutting. As a general rule, the larger the blade, the lower the number of teeth per inch.
What do the numbers on a circular saw blade mean?
The Number of Teeth: TLDR; More teeth: Smoother, finer cut. Fewer teeth: Faster, rougher cut. The correct number of teeth is important to ensure that you achieve a smooth cut with optimal chip removal and as little friction possible whilst sawing.
How many teeth does a finishing blade have?
Here’s a quick and dirty list of different tooth counts and their typical use: 16-24 Teeth: Demo/Framing. 32-50 Teeth: All-Purpose Cutting. 60-80 Teeth: Finish Grade.
What is a 24 tooth blade used for?
For most construction work, a 24-tooth general use blade is sufficient. That blade is very aggressive and will help you rip and cross-cut lumber and sheet goods quickly and with a high degree of accuracy. With a 24-tooth demo blade, you’re getting work done quickly, but you won’t get a near-finished edge.
How many teeth should a circular saw plywood blade have?
Diablo 6 1/2″ – 60 Tooth – “Ultra Finish” If you hate sanding, this is your blade. The higher tooth count is ideal for cutting through hardwoods, moulding and delicate plywood. Being a Diablo circular saw blade, it has the same stabilizer vents and durable carbide tips. This is a perfect blade for furniture building.
What is a framing circular saw blade?
Best Circular Saw Blade: Framing Blade You’ll probably use it for 75 percent of the work you do. It handles rough framing lumber, plywood and sheathing material with ease.
