circular saw quizlet Related Question:
What is a circular saw used for?
The circular saw is perhaps the most commonly used saw today, used extensively in both professional construction projects and DIY home improvement. This power tool uses a round metal blade edged with sharp teeth to cut an array of material such as woods, metals, cement block, brick, fiberglass, plastics and slate.
How do you describe a circular saw?
A circular saw is a power tool that cuts materials using a round blade. It may be mounted on the table, or it may be handheld. A circular saw is a power tool that allows cabinetmakers and carpenters to make a variety of cuts. Circular saws use a round blade that is edged with sharp metal teeth.
When using the circular saw the blade should extend through the material?
4. Adjust the depth of cut so the ends of three teeth are visible as the blade extends through the stock, 1/4″ teeth extension is maximum. 5. Before using a saw, check the base and angle adjustments to be sure they are tight.
Why is it called a circular saw?
Circular Saws Come First A more colorful story suggests that the saw was invented by an American Shaker named Tabitha Babbitt, who attached a circular blade to her spinning wheel after noticing villagers struggling with a heavy two-man saw.
Can I use a jigsaw instead of a circular saw?
Although a jigsaw can be used for most of the tasks that a circular saw can perform, including straight cuts and cuts on a tilt, the jigsaw uses that really take advantage of the tool’s qualities are jobs such as kitchen fitting and joinery, with their frequent need for complex cuts.
Can you cut a 2X4 with a circular saw?
Yes, a 7-1/4 inch circular saw has plenty of blade depth to cut a 2X4. This blade size can even make quick and easy 45 degree angle bevel cuts through a 2X4.
What is another name for a circular saw?
•Other relevant words: (noun) sawing machine, power saw, saw.
What two pieces of PPE should you wear while using a circular saw?
When operating circular saws, workers should wear appropriate personal protective equipment such as eye protection and hand protection, where necessary.
What is the most common blade size for a circular saw?
The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass. A 5-3/8-inch saw can cut through 2-inch dimensional lumber in one pass at 90 degrees but requires two passes at 45 degrees.
Which one should you do prior to operating the circular saw?
What should you do before start cutting with a circular saw? Wear safety glasses or goggles, or a face shield (with safety glasses or goggles). Wear an approved respirator or dust mask when exposed to harmful or nuisance dusts. Use appropriate hearing protection equipment in noisy areas.
What can circular saw cut?
With the right blade, a circular saw can be used to cut framing lumber, sheet goods, roofing, metal, masonry, and more. A powerful saw can be a major time-saver during demolition as well. Once you get used to using your circular saw, you can even use it to cut curves, like I did on my backyard deck.
What is the difference between a table saw and a circular saw?
Circular saws are lightweight, hand-held, and can be moved from jobsite-to-jobsite with ease. A table saw is heavier and more complex in its set up. Because of its weight and footprint, this tool is more difficult to move these saws around as easily as you are able to do with a circular saw.
What’s the difference in circular saws?
Regular circular saws have an RPM of 6,000 or higher while worm drive saws have an RPM of not more than 4,500. This difference of RPM is however balanced when it comes to torque. Worm drive saws offer more durability and power because they have larger teeth which have a more loading capacity than regular circular saws.
Is it better to buy a jigsaw or circular saw?
If you’re constantly needing to rip through boards, you know a jigsaw won’t cut it, so a circular saw is the more preferred option for you. If you’re doing intricate shapes and complex number cutting – a circular saw won’t help you there!
Which is better miter saw or circular saw?
A circular saw excels at breaking down sheet goods, and a miter saw is best for cutting down longer boards. A miter saw is more precise, due to the handheld nature of the circular saw. A circular saw is less expensive than a miter saw, and it’s more portable. A miter saw is safer to use than a circular saw.
