“The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you want – up to 24” – using the built-in measuring scale, and then make your cut. Just lock the saw sled at your desired cut width, and you’re all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.
Enter the BORA® Circular Saw Rip Guide – the perfect alternative to a table saw in both ease of use and price. Includes saw plate that fits most right- or left-handed circular saws. Extruded aluminum rail attaches to saw plate securely for confident cuts.
In this article, I’ve done my best to compare the five best circular saw guide rails – so you can have the best advice when looking at purchasing one for your circular saw. We start our review of the five best circular saw guide rails by looking at the Kreg KMA2700 Circular Saw Track. The Kreg Rip-Cut Circular Saw Guide is one of the best guide rails for the value you receive in exchange for the money you pay.
circular saw rip guide Related Question:
Can a circular saw Do rip cuts?
Use a Rip Cut Fence to Make Rip Cuts with a Circular Saw If you look at the shoe of your circular saw, nearly every model has slots to install a rip cut fence (AKA edge guide). These are typically metal T-shaped bars that slide in and lock down with a thumbscrew.
Do I need a guide rail for circular saw?
Simply put, it’s the best way to guarantee precise, straight, accurate cuts, either at 90º or 45º. If you need to cut workpieces that must be cleanly and accurately joined together, a circular saw (properly set up) and a guide rail is the way to get this done.
Are Circular Saw Rip Fences universal?
No, fences are not interchangeable on any circular saw. There are different widths. You can get a universal replacement set that would most likely fit.
Are guide rails universal?
The YouTool Guide Rail is universally suitable for almost all brands of saw, and is available up to 5 meters long.
Why is my circular saw burning the wood?
Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty. If wood pitch resins build up behind the teeth of the blade, the cutting speed will slow down, increasing the chances for burns. Commercial blade cleaners are sold for this purpose.
Which cut is when you cut a straight 90 degree across the grain?
A crosscut is a straight, 90-degree cut that cuts across the grain of the wood. Usually, that means turning long boards into shorter ones. On a table saw, you will usually use a miter gauge to make crosscuts. It’s the most basic cut you can make.
Why you should not use the miter gauge and fence at the same time?
If you’re going to make a crosscut, avoid using the fence and miter gauge at the same time. So why is that you’re asking? When you push the material towards the saw blade using the miter gauge, it can bind against the fence. Doing so will cause a nasty kickback.
What type of fence should you use for a ripping operation?
A table saw fence, also called a rip fence, is one of those essential table saw accessories that aid you in making accurate cuts. It sits to the right of the table saw blade and is used to keep your board in place as you make a rip cut along the grain.
Is a rip cut against the grain?
In woodworking, a rip-cut is a type of cut that severs or divides a piece of wood parallel to the grain. The other typical type of cut is a cross-cut, a cut perpendicular to the grain. Unlike cross-cutting, which shears the wood fibers, a rip saw works more like a series of chisels, lifting off small splinters of wood.
How does a rip fence work on a circular saw?
Make straight, accurate cuts with your handheld circular saw using this all-metal Rip Fence from DEWALT. The crossbar feeds through the fittings on the front of your DEWALT circ saw while the face glides along the length of a work piece to keep your power tool cutting along a parallel path.
