What should you do before start cutting with a circular saw? Wear safety glasses or goggles, or a face shield (with safety glasses or goggles). Wear an approved respirator or dust mask when exposed to harmful or nuisance dusts. Use appropriate hearing protection equipment in noisy areas.
Do not place hand under the shoe or guard of the saw. Do not twist the saw to change, cut or check alignment. Refer to Powered Hand Tools – Basic Safety for Electric Tools for general safety tips.
If your circular saw blade catches on thin-shave cuts or angled cuts, rotate and hold it open with an extended fingertip while still keeping both hands on the saw. Always wait for the blade to stop moving before setting the saw down on your work surface. Getting a circular saw with a blade brake will reduce your wait times.
If you have a circular saw or are planning to get one, then the wise thing for you to do, as with any other power tool is to learn the safety tips and precautions you need to take when using the saw. Good safety tips and precautions must be understood and followed diligently before using a power tool like the circular saw. The following are some of the safety tips you must adhere to while using a circular saw.
If you’re a newbie in woodworking, you would surely love to buy the safest circular saw in the market because you are anxious about the potential risks involved in using a circular saw. If you intend to buy a circular saw, it would be wise to know the safety procedures and tips on handling a circular saw. Some circular saw manufacturers might be considering the incorporation of the flesh-sensing feature already found in some table saws.
circular saw safety Related Question:
Is it safe to use a circular saw with one hand?
One hand on the saw is not a safe work practice, especially not for someone who self-describes as a novice. Hang on solidly for a few years and then see if you want to adopt a few bad habits.
What is circular saw kickback?
PREVENTING PORTABLE CIRCULAR SAW KICKBACK. Kickback is a sudden reaction to a pinched blade, causing an uncontrolled portable tool to lift up and out of the work piece toward the operator.
What is the safest type of saw?
TYPE OF SAW: Jigsaw Considered one of the safer power saws, the jigsaw features a large flat base called a “shoe,” which rests flat on the surface of the material you’re cutting and surrounds the blade and offers some protection.
What are common hazards when working with circular saws OSHA?
OSHA warns of three major hazards workers face when using a circular saw: the point of operation, kickbacks and flying particles. Point of operation: Injuries can occur if an operator’s hands slip while cutting or if they’re too close to the blade during cutting.
What PPE should be worn when using a circular saw?
What should you do before start cutting with a circular saw? Wear safety glasses or goggles, or a face shield (with safety glasses or goggles). Wear an approved respirator or dust mask when exposed to harmful or nuisance dusts. Use appropriate hearing protection equipment in noisy areas.
When using a circular saw is sure to cut on the waste side?
Most circular saw blades have a kerf (a cut or channel) 1/8-inch thick. Be sure to cut on the waste side of the material, or your finished piece will be 1/8-inch short.
Should you wear gloves when using a circular saw?
Should You Wear Gloves When Using a Circular Saw? You should never wear gloves when you use a circular saw, as the fabric of the glove can get caught in the blades of the saw and pull your hand into the saw blade. Any kind of loose fabric can get caught in the moving parts of a circular saw and cause serious injury.
How can you tell if circular saw kickback might happen?
Kickback happens when the saw blade binds or stalls suddenly in the wood and the saw gets driven back toward you. So the key to preventing this is to make sure your blade doesn’t bind in the wood.
Can a circular saw blade break?
Making sure your saw blade is working properly is the best way to reduce downtime and increase production. There are many common causes that can cause blade failure from blade selection to cutting speeds, feed rates and improper break-in, to maintenance problems and more.
Is circular saw safer than table saw?
Circular saws are generally more affordable than table saws, and they are also much safer. While it is perfectly possible to cause a serious injury with a circular saw, they are still much safer than table saws.
When using a circular saw be sure to cut on the waste side of the cut mark to allow for the blades?
Never use a circular saw that does not have an upper blade guard because the. guard protects you from touching the blade. When using a circular saw,be sure to cut on the waste side of the cut mark to allow of the blade’s. Saws with fine blades that are excellent for delicate and intricate cutting are called.
What is a circular saw used for?
The circular saw is perhaps the most commonly used saw today, used extensively in both professional construction projects and DIY home improvement. This power tool uses a round metal blade edged with sharp teeth to cut an array of material such as woods, metals, cement block, brick, fiberglass, plastics and slate.
What is the proper safety guard for power saws?
An upper guard must cover the entire blade of the saw. A retract- able lower guard must cover the teeth of the saw, except where it makes contact with the work material. The lower guard must automatically return to the co vering position when the tool is withdrawn from the work material.
