On Trademachines.com you can find 194 offers of used Circular Saws for sale or on auction worldwide. On TradeMachines, you can find a wide range of circular saws on sale, including cordless circular saw, small circular saw, compact circular saw, portable circular saw, table circular saw, with the promise to offer you the best circular saw according to your requirements. Metal cutting circular saws are produced by, for example, ALTENDORF, BOSCH, EISELE, KALTENBACH, SCM and ULMIA. To complete the market sarvy one should also check MAKITA circular saw and BOCSH circular saw as they are one of the most popular manufacturers out there.
circular saw used for sale Related Question:
How much are circular saws worth?
A circular saw can cost between $50-$200. Depending on your budget for the tool, you may want to go either cheaper or pricier. There are factors that can affect the price, such as brand or size. You will want to consider them when buying your own circular saw.
How thick can a 5.5 circular saw cut?
It turns out that it’s a simple question but very essential when you are going to do a project using this kind of saw. To sum up, a standard circular saw can offer a cutting depth of 2.5 inches as the maximum, but you can adjust the depth to match your requirements.
What size circular saw will cut a 4×4?
Cutting a 4×4 with a Circular Saw – Guide If you need to cut a 4×4 post, then the ideal tool is a large 12” miter saw. This saw has the blade diameter needed to chop through a 4×4 in a single pass, so if this is an option for you it’s the way to go.
Will a 5 1/2 inch circular saw cut a 2×4?
Yes! A 5.5 inch circular saw blade is perfect for cutting a 2X4. The blade capacity is deep enough to make a crosscut in 1 stroke. If you want to make a 45 bevel cut then you will need to make 2 strokes.
How shallow can a circular saw cut?
Circular saws turn corners about as well as a freight train, and standard models will cut only about 2 1/2 inches deep. There are ways around the shallow cut—for example, you can flip over a 4×4 and cut from two sides—but the curve limitation has no work-arounds.
What size circular saw Do I need to cut 2×4?
The lighter 5-3/8 inch saw blades would cut through that 2×4 at 90 degrees, but could no longer get all the way through the wood at a 45 degree bevel. So they could cut the occasional 2x they were more generally used for 1x stock and panels.
What is the minimum cut with a circular saw?
The circular saw can cut any depth from 0 to about 2 3/8″. This is awesome. But, to get the best quality cut and reduce the possibility of kickback, you’ll want to set the proper cut depth for your material. The blade should only project about 1/4 -1/2″ below the bottom of the material.
Can you cut wet wood with a circular saw?
If you’re cutting wet wood set the depth so that the entire gap between the teeth is clear of the board you’re cutting. This will stop your saw and cut line from getting clogged with wet saw dust.
What’s the difference between a circular saw and a skill saw?
Circular Saws vs. All skill saws are circular saws. They all have circular blades that spin rapidly to bite through wood. However, not all skill saws are circular saws. Circular saws can be gas-powered, have sidewinder or hypoid designs, or even be fixed to radial arms, which skill saws commonly aren’t.
What is the difference between a table saw and a circular saw?
Circular saws are lightweight, hand-held, and can be moved from jobsite-to-jobsite with ease. A table saw is heavier and more complex in its set up. Because of its weight and footprint, this tool is more difficult to move these saws around as easily as you are able to do with a circular saw.
Are Makita circular saws good?
Best Hypoid Circular Saw Makita, a reliable name in power tools, is one of the few manufacturers offering hypoid saws. With its lightweight magnesium construction, the Makita 5377-MG Circular Saw weighs only 13 pounds, light for a geared saw.
Will a 7 1/4 inch circular saw cut a 4×4?
Like miter saws that measure less than 12 inches, a circular saw’s 6.5-inch or 7.25-inch blade will not cut cleanly through a 4×4. The maximum depth of most circular saws is just 2.5 inches. This means you’ll need to make two cuts. Having to make two cuts makes it easier to set up the cut.
What saw should I buy first?
A jigsaw is great for cutting curves and shapes, and it can also be used with a guide to make straight cuts, which is why this is the first power saw you should own. Unless you plan to rip long sheets of plywood, a jigsaw is preferable over a circular saw.
Which size circular saw is best?
The most common and useful size for DIYers is 7 and 1/4 inches. Saws this size will cut through material more than 3-inches thick, and they also offer the widest variety of blade choices for cutting substances other than wood.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
