You may clearly notice a head-to-head competition between Reciprocating saw vs Circular saw. If I put a Circular saw and reciprocating saw in front of you, you will notice the difference between the blades attached to their system. A reciprocating saw has a knife-like blade attached to the system, while a circular saw has a disc blade with quite a large number of carbide or diamond coated teeth. In comparison to a reciprocating saw, a circular saw will give you a precise and clean-cut, though the cutting pace is a little bit slow. In general, you can differentiate between a circular saw and a reciprocating saw based on their shape and sizes. Generally, you would need both of your hands to operate the circular & reciprocating saw. Generally, the price of a circular saw is a little bit higher than the reciprocating saw.
Most construction sites, for example, keep at least one reciprocating saw and one circular saw in their arsenal. One of the most noteworthy differences between a reciprocating saw and a circular saw is their blade type. Though it should be fully clear now, the reciprocating saw and the circular saw are very different types of power tools.
Their design might be different- but there are a lot of people who don’t know the difference between a circular saw vs reciprocating saw. The main difference between a circular saw and a reciprocating saw is the purpose. The reciprocating saw is mostly used to cut tree branches, while the circular saw is made to cut thick wood.
When it comes to the most versatile tool to have around the house, job site, or DIY project, you’ll have a tough time choosing between the reciprocating saw vs the circular saw. If the circular saw is the Swiss army knife of powered saws, then the reciprocating saw is more like the crowbar. In my opinion, both a reciprocating saw and a circular saw deserve a place in your workshop.
A reciprocating saw is generally used for rough-cutting jobs and demolition, and a circular saw is mostly used for household woodworking. For rough jobs where clean lines are not an issue, a reciprocating saw is best where you need clean, well-placed lines, you should use a circular saw. To summarize, a circular saw will give you smooth and clean lines and cuts, whereas a reciprocating saw will give you a rough cut, but will provide power and flexibility with cutting materials down.
circular saw vs reciprocating Related Question:
What is better a reciprocating saw or circular saw?
A circular saw is better able to make smooth dimension cuts needed for a successful carpentry project. A reciprocating saw, on the other hand, can only handle rough dimensioning jobs that do not require much finesse.
What is a reciprocating saw good for?
A Reciprocating Saw is a handheld saw commonly used for demolition and remodeling. You can use it to cut through many types of materials such as wood, metal, PVC and nails. Get ready to tear the house down!
What is a reciprocating saw used for primarily?
But what are they? Basically, these are hand-held saws that take over when hammers and crowbars fail; demolition work. Yes, that’s the primary use for a recip saw, to cut and rip out the materials around doors, windows and when cutting through joists and plasterboard etc.
Are reciprocating saws worth it?
Reciprocating saws make demolition easier and more fun. You can struggle and rip it out with a variety of crowbars and hacksaws or you can use a reciprocating saw and just cut it free. It’s the ultimate demolition tool. Windows, walls, plumbing, doors and more—just cut and toss.
Can I use a jigsaw instead of a circular saw?
Although a jigsaw can be used for most of the tasks that a circular saw can perform, including straight cuts and cuts on a tilt, the jigsaw uses that really take advantage of the tool’s qualities are jobs such as kitchen fitting and joinery, with their frequent need for complex cuts.
What’s the difference between a jigsaw and a reciprocating saw?
With their long, slim blades, jig saws are ideal for jobs that require delicate wood cuts. Reciprocating saws, however, with their horizontal blade action, are designed primarily for rough cutting and demolition jobs, such as cutting wood and metal aggressively.
Can you cut a 4×4 with a reciprocating saw?
Most reciprocating saw blades range from 3 to 12 inches, meaning they have plenty of length to handle the 3.5-inch thickness of a 4×4 post. The design of a reciprocating saw also makes them ideal for cutting through fence posts that are already in the ground.
Can I use a reciprocating saw to cut tree branches?
Joe Truini: A reciprocating saw is one of the most versatile power tools you can own. It can cut virtually any building material. But it’s also great for trimming tree branches. Now you can use a standard reciprocating saw blade to cut tree branches, but you’ll get much better results if you use a pruning blade.
Can you cut wet wood with a reciprocating saw?
You can cut small trees with a reciprocating saw, and by small trees, we mean those around 5 inches in diameter at the most. To cut into wet, green lumber, you will need a pruning blade that will not get caught in the fresh fibers of the tree.
Can a reciprocating saw cut wood?
Reciprocating saws can churn through metal, masonry, wood, plaster, fiberglass, stucco, composite materials, drywall and more. The key to a successful cut is using the right type of blade for the material you are cutting. This guide highlights the teeth, dimensions, composition and uses of reciprocating saw blades.
Can you cut a circle with a reciprocating saw?
Use a Sawzall and Protractor A no. 2 pencil just isn’t going to do the trick: you want to be as accurate as possible. Simply use the sawzall to cut around the edges of the marking. When you’re done, hit the edges with a light 80 grit sandpaper to buff out any imperfections.
How long does a reciprocating saw blade last?
The average blade life for a reciprocating saw blade is about 10,000 hours. Blades will wear down over time, and will need to be replaced. You can tell when it’s time to replace your blade by the amount of material that has been removed from the teeth.
How powerful of a reciprocating saw do I need?
Ideally, go with at least 1-1/8″ stroke length and 3000 SPM. There are also compact cordless reciprocating saws with designs like the Makita Sub-Compact and Milwaukee Hackzall models. These will be lower in the stroke length and speed but will help you get into much tighter places.
What saw should I buy first?
A jigsaw is great for cutting curves and shapes, and it can also be used with a guide to make straight cuts, which is why this is the first power saw you should own. Unless you plan to rip long sheets of plywood, a jigsaw is preferable over a circular saw.
What can I use instead of a circular saw?
Jigsaw. A jigsaw is a great alternative to a circular saw as it can perform many of the same cuts. However, they can wonder and not give a perfectly straight cut unless they are supported by a guide along an edge. A sander or hand planer can also be used to finish off a jigsaw cut.
