More info about how do you measure chainsaw chain

“Using the wrong size bar or chain can damage the chainsaw and injure the chainsaw operator,” says Vince Christofora of Woodstock Hardware. Read on to learn how to measure your chainsaw’s bar and chain. Sometimes called a chainsaw blade, the chainsaw bar is the metal “Arm” that holds and supports the chain during cutting.

Measure the distance between any 3 consecutive rivets that hold the chain assembly together. The rivets are noticeable between the drive links and the cutters – the cutting teeth that lie on top of the chain. The pitch, together with the number of drive links, describes the chain’s length when seeking replacement chains.

I’ll show you the easiest methods for how to measure a chainsaw bar and how to measure a chainsaw chain length. The second way for how to measure a chainsaw bar length is called the “True” length of the blade. With the information you learned here, you no longer have to wonder how do you measure a chainsaw bar or chain because you now know how to do it.

how do you measure chainsaw chain Related Question:

How do you measure a chainsaw chain size?

To get the correct size, simply count 3 rivets on the chain and measure the distance between them from the centre points. Now divide this by half to get your size. As an example, three rivets that measure ½ an inch across divided by two gives you a pitch of a ¼ inch.

How do you measure a chain?

To measure, wrap a soft tape measure around your neck, keeping the tape measure parallel to the floor as you measure. Then, add 2 to 4 inches (5 to 10 cm) to your neck measurement to calculate your minimum recommended chain length.

Whats the difference between green and yellow Stihl chains?

Others will chime, looks like green is homeowner (and dirty condition) safety chain. That stays sharper longer in dirty conditions. The yellow looks like full chisel, cuts faster but dulls quicker. I like full chisel and just keep it sharp.

What are the different sizes of chainsaw chains?

Chainsaw chains are available in the following pitch sizes, measured in inches: 1/4″, . 325″, 3/8″, 3/8″ low-profile, and . 404″.

What size chain is on my Stihl chainsaw?

If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The last three numbers (or letters) denote characteristics of the chain.

How do you measure a gold chain?

Take your necklace length (measured from one end of the clasp) and add it together with your neck circumference measurement. Then, you can determine how long or short a chain you should wear around your neck by using this formula: Length of your necklace + length around your neck = proper chain length for you to wear.

What length chain should I get?

After a measurement is obtained, its a good idea to opt for a necklace size that is at least the second size up from your neck size. For example, if you have an 18 inch neck, you should probably choose a chain length of 20 inches or more. An 18 inch chain would feel too tight.

How many links does a 18 inch chainsaw have?

0.050 Gauge 0.325 in. Pitch Chainsaw Chain, 72 Drive Links.

What’s the difference between 404 and 3/8 chain?

Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.

What do Stihl chainsaw chain numbers mean?

Find the gauge of the chain by locating the number stamped on the drive link. A 1 equals a 0.043-inch gauge, 3 equals a 0.050-inch gauge, 5 corresponds to a 0.058-inch gauge, 6 means the chain has a 0.063-inch gauge. A 0 means the chain has a 0.080-inch gauge, but this gauge size is found only on the Harvester chain.

What do Oregon chain numbers mean?

Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches – 1/4″ is the smallest, 3/8″ is the most popular, and 3/4” is the largest.

What is full chisel chain?

A full chisel chain is designed for the fast cutting action. In comparison to the semi-chisel chain, this chain has square-cornered teeth which makes it more aggressive when cutting.

What is the fastest cutting chainsaw chain?

A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available.

What does full chisel chainsaw chain mean?

Full chisel, semi-chisel, chipper The sharp corner of the full chisel cutters split wood fibers easily and provides the fastest, most efficient cutting in clean softwood. The corner of the cutters on a semi-chisel saw chain are slightly rounded.

What is the most common chainsaw chain size?

Most chainsaws use 0.050″ (1.3 mm) and 0.058″ (1.5 mm) gauge chains. 0.043″ (1.1 mm) and 0.063″ (1.6mm) gauge chains are less common.

Leave a Reply

Your email address will not be published. Required fields are marked *