Do your best to get the sharpening angle right so that you don’t dull the chainsaw blade too fast. Another thing to keep in mind is that cutting dirty wood might dull the chainsaw blade faster. You can’t expect the chainsaw blade to dull at the same rate every time because you’re likely doing different jobs that will take a different toll on the sharpness of the blade.
Your chainsaw blade gets dull so fast because your chain is hitting the ground, the tree is filled with dirt, and/or the bar is bent. A dull chainsaw blade will lead to wear of different components of the saw, including the clutch and engine since they would have to work harder because of the blade’s dullness. If you are cutting firewood that has been left on the ground, you would need to sharpen your chainsaw more often as the accumulated dirt would dull your blade faster.
When you consider how fast the chain is moving, it’s not hard to understand that it can become very dull very quickly. Just hitting one little rock can dull a chain instantly. Like DavidV said, get yourself a new chain, keep it out of the dirt and sharpen it after every tank of gas to keep it from getting dull.
“I have a Remington Rodeo 51cc Gas Chain Saw chainsaw.I use the following chains: – Oregon 18-Inch Pro-Guard Chain Saw Chain Fits Craftsman, Echo, Homelite, McCulloch, Poulan H72.- Oregon 20BPX072G Micro-Chisel Saw Chain.325-Inch Pitch.050-Inch Gauge 72 Drive Link Count. My problem is as follows. The chain goes dull WAY fast. Without exaggerating, when I put a brand new chain on the saw, I can saw maybe one or two 20 inch diameter PINE trees, before the before the saw stops auto-feeding, and cutting properly. Earlier today I put the”Oregon Pro-Guard” chain on my saw, validated the chainsaw had enough bar and chain-oil and tried cutting a 16-inch diameter Red Oak. Do some night cutting!!!! I wonder how many sparks you will see. Ok lets see a picture of the dull chains…. and the naked bar if possible from an end sighting down.
The chainsaw cuts through the horizontal material from the bottom to the top, using a pull motion as the chainsaw is brought towards you. By handling the chainsaw correctly, you are less likely to dull your chainsaw chain. Having the rakers on your chainsaw installed too high can lead to an inadequate performance when using your chainsaw.
how fast does a chainsaw dull Related Question:
Why does my chainsaw get dull so fast?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
How long does it take to dull a chainsaw chain?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
Does hard wood dull a chainsaw?
Re: Chainsaw and oak Very hard but really puts out the heat in the fireplace. If you cut it green it is not too bad. After it has dried it will dull a chain about each tank of gas. And that was Stihl chain.
How many times can I sharpen a chainsaw chain?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.
Does dirt dull chainsaw blade?
Nobody plans to run their chain saw into dirt. But when you cut close to the ground, you’re just begging for a quick dip into dirt, rocks and crud. All it takes is a second in the dirt to dull the cutters. In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch.
How much does it cost to sharpen chainsaw chain?
HOW MUCH DOES IT COST FOR YOU TO SHARPEN MY CHAIN PROFESSIONALLY? If you bring the chain into our shop off your saw, our average chain sharpening price ranges from $13- $16.00, depending on the number of cutters.
Is it worth sharpening a chainsaw?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
How do you know when to sharpen a chainsaw?
When Should You Sharpen Your Chainsaw Chain? A general rule of thumb is to sharpen your chain when you notice it is not cutting as well as before. Another way is to look at the sawdust if you see small chunks it is an indication that the chains are getting dull. Large chunks indicate a sharp chain.
How often should you change chainsaw chain?
The chain sprocket must be replaced if the depth of the wear marks reaches about 0.5mm, i.e. the wear limit. A seriously worn chain sprocket can cause the chainsaw chain and guide bar to wear at an increased rate, as well as reducing cutting performance too, so it’s important to keep an eye on.
What is the longest lasting chainsaw chain?
Even more durable than standard chain is carbide-tip chainsaw chain. Carbide tips last longer than chrome and are not affected by heat. Because of these qualities, carbide chain is excellent for cutting objects that would dull standard chain quickly, such as railroad ties.
What is a ripping chain?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.
Does cutting frozen wood dull a chainsaw?
It’s not impossible to cut frozen wood with a chainsaw, but it is extremely difficult. Cutting wood requires a sharp chain and frozen wood will dull your chain.
Why is my chainsaw bar smoking?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Does a new chainsaw chain need to be sharpened?
Yes, the chains of the chainsaw come sharpened from the factory when you buy a new one. There is no need to sharpen it before your first job. But even the sharpest chain for the chainsaws available in the market will lose their sharpness over time and grow very dull.
Does charred wood dull a chainsaw?
Re: Cutting burnt wood From my limited experience, it dulls chain fast. If you have a lot to do, then Bailey’s sells chain to cut in dirty conditions.