Again keeping in mind the brand of chain and also the brand of file carries with it the same amount of debate fodder as mix oil ratios or brand of chainsaw. I have bought a lot of cheap files usually last well enough like others said normally keep the files cleaned off they stay cutting very well. Harder the file the longer they last, though harder files also break much easier… that is usually how mine go…. Mark.
The life expectancy of a chainsaw chain is determined by it’s use and maintenance, not by a pre-determined timeline or expiration date. Second, if I sharpen a chain and only take off 50% of the metal that you do when you sharpen, then that would mean I can sharpen my chain 50% more times before discarding it. If you sharpen a chain past those lines, you risk the chain falling apart, or even flying off the chain while you’re using it.
When you have to sharpen your chainsaw chain dependent on the quality of the chain and how often you use it. It is good to note the life expectancy of a chainsaw as that determines how often you need to sharpen it. The professionals use grinders to remove the imperfections from the chainsaw so, ensure a grinder is not used regularly to sharpen your chainsaw chain.
how long do chainsaw files last Related Question:
How often should you change your chainsaw file?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
How many times can a chainsaw file be used?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.
How do I buy a chainsaw file?
Simply put, the type of chainsaw file you need directly corresponds with the size of your chain pitch. The larger the pitch will mean the higher the cutting teeth will be. The higher the teeth will therefore mean the larger the file will need to be.
Why does my chainsaw chain get dull so fast?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
Why is my chainsaw bar smoking?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
How much does it cost to sharpen chainsaw chain?
HOW MUCH DOES IT COST FOR YOU TO SHARPEN MY CHAIN PROFESSIONALLY? If you bring the chain into our shop off your saw, our average chain sharpening price ranges from $13- $16.00, depending on the number of cutters. We are happy to remove and re fit your chain to your saw for a small additional fee.
How do you get pitch off of a chainsaw?
My own favorite sap fighter is WD-40. Let it soak in for a couple of minutes, then take an old toothbrush to it.
How do you clean wood files?
To clean wood from a rasp or file, dip the tool in hot water for a few seconds. The wood will quickly swell as it soaks up the water and will pop out of the pockets it’s filling. Remove the tool from the water, brush out the wood, and let the tool dry.
Can you use wd40 on chainsaw?
Step 5: Lubricate Your Chainsaw Before you put the chain back onto your chainsaw you will have to lubricate it to clean it, using WD-40® Multi-Use Product. Before refitting the chain into the chainsaw, wipe off all the excess residue and then reattach it to the guide bar.
What kind of file do you use to sharpen a chainsaw?
While some professional loggers use square files like the ones to sharpen knives, almost all other chainsaw owners use round files for sharpening. There are three common sizes of chainsaw files: 5/32, 3/16 and 7/32.
Where are Stihl files made?
STIHL saw chains and guide bars not only provide outstanding cutting performance on STIHL chainsaws, but also on other brands of chainsaws. STIHL saw chains are precision made in STIHL’s factories in Switzerland.
What does a round file do?
Round files are machinist’s files and, just like half round files, they can be used for creating semicircular grooves, finishing and deburring concave surfaces. They are often used in jewellery making to create detailed patterns in bracelets.
How many different size chainsaw files are there?
Chainsaw File Size As we will see on the graph, the primary file options are 4.0 mm, 4.8 mm, and 5.5 mm. It comes in either a round file or flat file depending on the type of cutter you are planning to sharpen.
What size file do you use on a 3/8 chainsaw chain?
With that said, the Stihl 3/8″ chain is identical in size to Oregon and other brands which all recommend a 7/32″ file.
Is it worth sharpening a chainsaw?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.