There are a couple of instances where you may need to reset your M-Tronic machine. Start the machine and run it in the Cold start position for at least 90 seconds. Start the machine and run it in the Cold start position for at least 30 seconds but no more than 60 seconds.
Determine the carburetor type before adjusting the high- and low-speed screws. To do this, turn the “L” screw clockwise as far as it will go, using a flat-head screwdriver, then turn it counterclockwise as far as it will go. If it turns more than one complete revolution, it’s a type A carburetor, and if it turns less than one revolution, it’s a type B carburetor.
how to calibrate a stihl chainsaw Related Question:
How do you adjust the H and L on a Stihl chainsaw?
Determine the carburetor type before adjusting the high- and low-speed screws. To do this, turn the “L” screw clockwise as far as it will go, using a flat-head screwdriver, then turn it counterclockwise as far as it will go.
How do you calibrate a Stihl M Tronic?
Start the machine and run it in the ▲ Cold start position for at least 90 seconds. Do not touch the throttle or accelerate the saw during this time. After 90 seconds, switch off the machine. Your machine is now re-calibrated and ready for operation.
What does the C stand for on Stihl chainsaws?
Professional Saws To help you identify model features, look for these corresponding symbols: C = Comfort feature, E = Easy2Start™, Q = an additional chain braking system, R = wrap handle, and M = STIHL M-Tronic™.
Why does my chainsaw start but wont stay running?
A clogged fuel filter will starve your chainsaw’s engine, and it can also damage it by letting contaminated fuel into the engine. Bad fuel can also clog the carburettor. Clogged carburettors are one of the most common reasons why a chainsaw won’t stay running or start at all.
How much does a Stihl MS 362 cost?
Starting a $809.99 with a 18″ bar and chain. Brains and brawn come together in this well-rounded professional chainsaw. The MS 362 C-M features the same great power, weight and fuel efficiency as the MS 362, but also features our exclusive STIHL M-Tronic™ engine management technology.
What is the difference between STIHL 461 and 462?
The 461 has more felt torque and a wider power band. Probably handle long bar work better than the 462, but it’s also heavier. The limited time I have run the 462 I was very impressed with how small and nimble it is for a 70cc class saw.
What does H and L mean on Stihl chainsaw?
One marked “H”, for high speed, one marked “L”, for low speed and one marked “LA”, which is your low speed air adjustment for idle.
What is a Stihl 311y?
The MS 311 is a high-tech workhorse with a step up in horsepower and features over the MS 291. With our improved engine technology, you get higher fuel economy for longer run times. The MS 311 also has larger fuel and oil tanks for even longer extended use. You’ll stay productive – while you’re saving money on fuel.
Why does my Stihl chainsaw bog down?
Stihl carburetors have three adjustment screws. One controls the fuel mixture when the engine is idling, one controls it when the engine is operating at low speed and one is for high-speed fuel control. When the saw bogs down during cutting, it’s usually the high-speed screw you need to adjust.
Why does my chainsaw cut out when hot?
When your chainsaw quits after it gets hot, you either have a problem with gas flow being restricted into the engine or with the spark. This is a common occurrence on older-model chainsaws. By replacing your spark plugs and keeping your gas lines clear you can reduce the chances of this problem recurring.
What chainsaw do loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
What’s the biggest chainsaw STIHL makes?
The largest and most powerful chainsaw in the STIHL lineup. For the largest, toughest and most demanding jobs, professionals can find the performance they need in the MS 881 chainsaw. With its updated engine design and up to 41” guide bar length, the MS 881 is the largest, most powerful saw in the STIHL lineup.
Why does my Stihl chainsaw dies when I give it gas?
An engine stalls when it’s getting too much or not enough fuel from the carburetor. Stihl chainsaw carburetors usually have three adjustment screws: one each for idle, low speed and high speed. If the saw stalls while it’s idling, adjusting the idle screw, which usually is marked LA, should help.
Why does my chainsaw stop running after a few minutes?
Re: chainsaw shuts down after a few minutes Sounds like a fuel supply issue. Fuel line, fuel filter, carb diaphragms, impulse hose, plugged carb screen, bad fuel, etc.
What chain does a Stihl 362 take?
2-Pack 20″ Full Chisel Saw Chain for Stihl MS 362 Chainsaws – (20 inch, 3/8″ Pitch, 0.050″ Gauge, 72 Drive Links, CSC-D72)