To do the job safely, you should learn how to cut a fallen tree with a chainsaw. Limbing a tree would be easier if you can cut through all the branches the tree has. To cut the fallen branches, cut through both sides in two independent shots.
Whether you are using a chain saw to cut firewood, trim trees or harvest large timber, you will be performing three basic operations: felling, limbing and bucking. Experienced loggers are often killed by felled trees that hang up or snag in adjacent trees. Proper limbing techniques to reduce damage to the tree are covered in MU Extension publications G5160, Pruning Forest Trees, and G6866, Pruning and Care of Shade Trees.
how to chainsaw large fallen tree Related Question:
How big of a tree can a 16 chainsaw cut?
16 chainsaw would cut through a 14″ tree diameter. 10 inch chainsaw for 8″ in diameter. 6 inch chainsaw can cut a 4″ diameter.
How do you cut a tree without a pinching chainsaw?
To stop your chainsaw from getting stuck, make a cut on top of the log or tree that’s preferably one-third of the log’s diameter. Use your chainsaw to cut from the underside until you meet the initial top cut. Always stand on the side when cross-cutting to prevent injury.
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
Do I cut compression or tension first?
Always cut on the compression side first! The area on the outside of the bend will pull apart when cut. This is the tension side. If you decide to cut this side only, the tree will split apart before the cut can be completed.
What should you not do when a tree falls off?
When cutting up a felled tree, avoid touching the ground with the chain because even a brief encounter will severely dull the cutting teeth on your chain saw. If possible, cut partially through the tree and then rotate it to cut the rest of the way through.
Which way will a tree fall when cut?
Plan the Notch The notch is what will allow the tree to fall properly, so you want it on the “fall side” so the tree will fall in the direction of the notch. The fall side should be the heaviest side of the tree. Cut at a comfortable working height.
How tall of a tree can you cut down?
While many people automatically call an arborist to take down a tall tree, you can cut down your own tall tree with the correct precautions. Call a professional if the tree you wish to cut down has a trunk more than about 16 inches in diameter or if buildings or other obstacles may be hit when it falls.
How big of a tree can a 20 inch chainsaw cut?
A good rule of thumb is that the diameter of the trees you cut regularly should be no more than twice the length of the bar on a chainsaw. That means a 20-inch chainsaw can handle a 36-inch tree (remember, effective cutting length is roughly -2 inches of the bar length).
Can an electric chainsaw cut down a tree?
Although electric chainsaws are smaller and easier to carry, most lack the power and stamina to cut down large trees. If you have big trees on your property that you want to remove or cut into firewood, a gas model is your best bet. Electric chainsaws come in two types: corded and battery-powered.
What size tree can you cut with 18 inch chainsaw?
How Big of a Tree Can an 18 inch Chainsaw Cut? An 18 inch chainsaw can cut a 16 inch diameter tree in a single pass. This is because your chainsaw bar should be 2 inches longer than the tree’s diameter if you are cutting it in a single pass. But if you cut from both sides, an 18″ chainsaw can cut a 32 inch tree.