If the trunk is on a fairly firm surface, you can cut the trunk to length where it is. Making thin trunks, branches and split pieces into firewood. Once you have cut your own logs, they will need to dry for around two years before they can be used on the fire.
Like big ones that you can’t cut 3/4 of the way then rotate the log. Cut the bottom a bit first in areas that it made sense. Cut the logs into manageable sections to roll and finish cuts without hitting the ground.
Learning how to prevent your chainsaw from pinching when you’re cutting firewood is something everyone should understand. There are two easy techniques I like to use to prevent a chainsaw from pinching when the tree or tree top is already on the ground and you’re ready to cut it up into firewood sized pieces. Placing small pieces of firewood under the tree or using wedges are two easy ways to prevent your chainsaw from pinching when you’re cutting up a tree for firewood that’s already on the ground.
Here’s our essential guide to cutting logs using a chainsaw, saving time, and making your life easier. A word of warning, be careful not to cut into the ground when using this method. Follow the guide above and you’ll be a chainsaw master in no time!
how to chainsaw wood on the ground Related Question:
Can you cut wood on the ground with a chainsaw?
Cutting a Log on the Ground Technique When a log is on the ground, you can use the overbucking technique to cut it. Here’s how to accomplish that task: Start cutting from the top of the log, applying light pressure to the chainsaw. The chainsaw should do the work, and the teeth should pull the chain bar into the wood.
Can you chainsaw into the ground?
Don’t Cut Into Dirt In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch. Plus, dirt wears the sprocket at the bar tip.
Can you dig a trench with a chainsaw?
Yes! Chainsaws are great for digging trenches but there are some downsides so make sure you weigh all of your options before deciding what method will work best for this project.
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
How do you keep a chainsaw from getting stuck?
To stop your chainsaw from getting stuck, make a cut on top of the log or tree that’s preferably one-third of the log’s diameter. Use your chainsaw to cut from the underside until you meet the initial top cut. Always stand on the side when cross-cutting to prevent injury.
Can you cut wood on the ground?
Wedges will come in handy when felling trees as well as bucking logs and cutting firewood already on the ground. Using a wedge for felling a tree will help it land in the location you want it to.
How do you get rid of fallen tree root balls?
Try to cut far from the root ball. Next, use the grub hoe to lift out the cut roots. Pull additional ones out by hand if you can. Push the stump back and forth to loosen the roots and continue to cut and pull roots until you are able to remove the root ball from the soil.
What happens if you run a chainsaw without bar oil?
Without lubricant, the speed at which the chain moves over the chainsaw bar can cause some serious friction. A slowed-down chain and excessive fuel burning mean there’s a lot of friction between your bar and chain, which means a lot of heat is being produced that could do major damage to your saw.
What should you not do with a chainsaw?
Don’t Cut on the Ground When Using a Chainsaw Cutting on or near the ground puts you at risk for sinking the bar into the dirt. When learning how to use a chainsaw safely, one of the first things you should do is make sure to make your cuts off the ground.
Can you run a chainsaw without the chain?
It is not recommended to run a chainsaw without a chain. If you need to run it as a movie prop or you are fixing the engine, ensure that you run it for a short time only. I do not recommend letting it run for more than 5 minutes. Without a chain, the chainsaw will cause the engine to rev higher.
How long should chainsaw blade last?
The lifetime of a chainsaw chain has no fixed limit and depends on usage and maintenance. The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
Should you flip your chainsaw bar?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
How do most chainsaw accidents happen?
CHAINSAW ACCIDENTS It occurs when the tip of the guide bar and chain contact an object, forcing the guide bar violently backward and upward. Kickbacks can occur in less than one-tenth of a second, causing severe head, face, neck, shoulder, and hand injuries.
What is bucking a tree?
Bucking a tree The process of cutting a tree into usable lengths is called bucking. Bucking often occurs as a tree is being limbed, such as when the limbs of the crown are to be used as firewood. When cutting firewood, make sure you know the needed length of wood before you leave home.
What should you not do when a tree falls off?
When cutting up a felled tree, avoid touching the ground with the chain because even a brief encounter will severely dull the cutting teeth on your chain saw. If possible, cut partially through the tree and then rotate it to cut the rest of the way through.