Just line up the edge of the track with your cut line and start cutting! Honestly, once I bought a track saw, I gave away my circular saw and never looked back! In a small workshop, a track saw can replace the need for a larger table saw, or even replace the table saw altogether! You can find out more about the difference between a track saw vs table saw here. A track saw can potentially replace a circular saw, a miter saw, and a table saw! If you’re short on space, this is a great option.
If you try to freehand guide a circular saw along the same path, the result will usually come out uneven and useless, so save some money and build your own track saw using your circular saw and a sheet of wood. We’ve posted the DIY plans for building your own circular saw guide, but this video from DIY Creators does a great show explaining how to build your new track saw. You’ll need a trim router, measuring tape, drill, and combination square to build this track saw, along with aluminum flat bars that will run inside the track and keep the saw straight.
There has been a lot of buzz about Track Saws with both DeWalt, and Makita finally coming out with versions for the USA. But I bet many people don’t know that you can turn just about any circular saw into a track saw for a fraction of the cost of a complete track saw package all with a kit from EurekaZone. The basic system consists of a base that you attach to your own circular saw, or you can buy a saw with a pre-attached base from EurekaZone, and an aluminum guide rail. Check out the into video of the basic track saw kit.
There are retro-fit products available that turn your circular saw into a track saw. “With the saw in place flip the fence over with the factory edge facing right and, up against the saw and then strike a line on each side to mark its basic location. Measure 6” from the right side of the fence to the right side of the jig and make a mark at each end. Clamp the jig down and run the saw along the saw guide again keeping even and consistent pressure against the fence.
using circular saw as track saw Related Question:
Can I use a circular saw as a track saw?
A circular saw can be used for all the same functions as a track saw, but doesn’t necessarily do them quite as well. If you’re on a budget, you can turn your circular saw into a makeshift track saw with straight edge guide. You can make your own circular saw jig, or buy one instead.
Can you use a DeWalt circular saw on a track?
The DWS5022 is a reversible 1.5 metre track for use with the DWS520 plunge saws, as well as other DeWalt circular saws and routers. It features a support rail which runs up the middle and distributes weight effectively to deliver an accurate cut.
What is the difference between track saw and circular saw?
The critical difference is that a circular saw has a long and rectangular rail in the front, unlike its counterpart. A circular saw performs double cuts as the rip cuts and the crosscut, whereas the track saw three. The circular saw has a protective guard, whereas the track saw has none.
Can you make a track saw?
Track saws are easy and affordable to make, and the good thing is that the DIY track saw still cuts fast, giving you accurate sheets of plywood for any woodworking project you might have.
Why is festool so good?
So what makes Festool so good? We believe it’s because Festool has focused on creating high-performing tools that are robust, reliable and precise. Their numerous innovations, like their dust extractors and cordless options, put Festool in a league of their own.
Do I really need a track saw?
Conclusion. A track saw is unbeatable when it comes to making long, accurate cuts. It can do most things a table and circular saw can, while being more portable than a table saw and more accurate than a circular saw. It’s also better than a table saw at breaking down large sheets of plywood.
What is the advantage of a track saw?
Track saws make long, precise cuts faster and better than table saws and circular saws. They are light and portable, don’t need clamps and set up quickly and accurately.
Is Festool made in China?
Festool designs and engineers its portfolio of innovative power tool products in its home country of Germany and all Festool power tools are manufactured in Europe.
Where is Makita made?
Makita. Since 1985 Makita has produced products here in the U.S.A. at a facility just outside of Atlanta in Buford, Georgia.
Is Festool made in the USA?
Festool products are primarily manufactured in Neidlingen (Germany), Illertissen (Germany), and Česká Lípa (Czech Republic). In July 2017, Festool opened its first North American production line at its Lebanon, Indiana, facility, where it produces mainly guide rails for its track-saw system.
How do you cut straight with a circular saw without a guide?
To ensure a straight cut, press the saw firmly against the straightedge as you push it along. Clamp a perfectly straight board or metal straightedge to a sheet of plywood to make cabinet-quality straight cuts.
Why is my circular saw burning the wood?
Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty. If wood pitch resins build up behind the teeth of the blade, the cutting speed will slow down, increasing the chances for burns. Commercial blade cleaners are sold for this purpose.
Can a circular saw cut a 4×4?
Circular Saw. A circular saw is one of the best means of cutting a 4×4 post. Most people own a circular saw, its portability makes it easy to cut 4x4s from the ground, and they can make precision cuts by using a relatively simple trick.
Are circular saw Rip Fences universal?
No, fences are not interchangeable on any circular saw. There are different widths. You can get a universal replacement set that would most likely fit.
