If you can just learn how to modify a chainsaw for more power to modify your small chainsaw, you will be able to keep using your trusty small chainsaw and get more output. To increase your chainsaw’s power output, you will have to modify your chainsaw’s muffler. So when the issue gets resolved, that portion of engine power gets used in operating the chainsaw instead. And thus, modifying your chainsaw’s muffler can increase the saw’s power output up to around an extra 0.5 HP.How to Modify a Chainsaw for More Power – Steps.
These are the exact steps I follow to wood ports my chainsaws and got 10%-25% power gain. One more thing to add, if you are a homeowner, you might never need to woods port your chainsaw. If you use your chainsaw for milling, read our guide on portable chainsaw mill and chainsaw mill attachment for getting the most out of your chainsaw.
That’s what chainsaw porting means, to increase the power of its engine. Steps in how to port a chainsaw Step one: Open up and make the exhaust larger. There are others methods of chainsaw porting which has the same effect of power increase.
how to improve chainsaw performance Related Question:
How do I get more torque out of my chainsaw?
My opinion the only proper way to get more torque out of a chainsaw, is to lower the “gear ratio” at the drive sprocket. That is run a smaller drive sprocket. Back in the day gear transmissions were a very reliable way of producing extra torque. .. Making a living with a saw since age 16.
Why does my chainsaw dull so fast?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
Why is my chainsaw weak?
A weak spark on a Husqvarna chainsaw can be caused by one of these misfiring components in the ignition system. Properly maintaining and cleaning the saw on a regular basis will prevent most spark issues. Most problems can be isolated easily and fixed with a few simple tools and parts.
Can a chainsaw run without a muffler?
A chainsaw will run perfectly without a muffler but using it without the muffler is not recommended for two main reasons. Firstly, the muffler reduces the noise made by the saw, and secondly, it provides protection to the cylinder by keeping debris from getting in.
What is torque in a chainsaw?
Torque is a method of rating the power produced by a machine and it’s work capability. In simple terms, torque is a measure of rotational power, i.e. how much power the engine delivers to rotate the blades of your Chainsaw.
Why do loggers run upside down bars?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
How often should you flip the bar on a chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
How long should a chainsaw blade last?
The lifetime of a chainsaw chain has no fixed limit and depends on usage and maintenance. The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
Why does my chainsaw chain smoke?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Can I use wd40 on my chainsaw?
We recommend using WD-40® Specialist® Fast Acting Degreaser and soak it for 10 to 15 minutes. Next, use a wire brush to remove all the grime (repeat several times) and wipe with a paper towel to make sure all the dirt is gone.
How much does a STIHL 881 cost?
$2,029.99. The largest and most powerful chainsaw in the STIHL lineup. For the largest, toughest and most demanding jobs, professionals can find the performance they need in the MS 881 chainsaw.
What is the lightest most powerful chainsaw?
Weighing only 5.7 pounds (without bar and chain), ECHO’s CS-2511P is the lightest gas-powered rear-handle chainsaw in the world with the most power in its class, states the company.
What’s the biggest chainsaw ever made?
The new STIHL MS 881 is the world’s most powerful chainsaw in production today. Following on from the highly regarded MS 880 chainsaw, which was a favourite of foresters, the arboriculture industry and saw-mill operatives, the MS 881 was designed with the largest timber jobs in mind.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
How many times can a chainsaw chain be sharpened?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.