Steps for changing a circular saw blade Unplug the saw’s power cord from the electrical outlet or extension cord. Use the blade wrench to tighten the arbor nut until it’s snug; be careful not to over-tighten the nut or it’ll be difficult to loosen it the next time you change the blade. If the saw has a diamond-shaped arbor, straddle the blade over two wood blocks and use a hammer or punch to tap out the diamond insert from the center of the saw blade.
how to install circular saw blade Related Question:
What happens if you put a circular saw blade on backwards?
You can run a saw blade backwards and it cuts pretty well. However it is not at all a good idea. The two big reasons not to do this is that saw tips are much more likely to come off if the saw blade is run backwards and that the whole saw blade is much more likely to come apart if it is run backwards.
Which way should teeth face on circular saw?
The teeth should be cutting UPWARDS, in a clock-wise direction. You’ll also notice that when your blade is installed correctly, the teeth will be pointing upward. Remember: circular saws (as most saws) cut on the upward stroke.
Why does my circular saw burn the wood?
A dull blade will make it hard to cut quickly, and the slower the feed rate of the saw, the more friction against the wood and the greater the likelihood of scorch marks. Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty.
Do all circular saws rotate the same direction?
Circular Saws This means that the circular saw cuts wood on the upstroke. For a right handed circular saw (most common), this means that the blade rotates counterclockwise, which is similar to the table saw. For a left handed circular saw, the blade rotates clockwise.
Will a wood blade cut metal?
While a metal-cutting saw has a collection bin to prevent metal chips from getting into the machine, a woodcutting saw isn’t designed this way. If you do decide to use a wood saw on metal, only use a 7 1/4-inch blade and preferably a worm drive blade, which provides extra torque.
Why are so many circular saws left-handed?
The placement of the cordless saw blade, on the left side, gives you a clearer line of sight when you cut. The reason for this is because the main bulk of your circular saw is not blocking your view. Cordless circular left-handed saws provide you better movability.
Why are most circular saw right blade?
Blade-Right for the Right-Hander Using the saw this way will place the motor weight over the waste edge when you cut from the end-side of a board or sheet. This means the saw eventually cuts off its own support. Most users have no trouble holding the saw steady, but this can result in bind-ups.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
What is the space between two protruding teeth on a saw blade called?
Gullet (handsaw) The space between a saw’s teeth, where the saw dust is carried out. It is an equilateral triangle, just like the file that shapes the teeth.
Why is my circular saw blade smoking?
Improperly Set Circular Saw Blade Can Cause Smoking By flaring the teeth, you make sure they are the only thing contacting the material during the cut. If your blade set is disrupted for any reason, then your blade’s body could be contacting the wood during the cut, causing heat and smoke.
What does more teeth on a saw blade mean?
The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish. Gullets between the teeth remove chips from the work pieces.
How many teeth should my saw blade have?
TPI is the number of teeth the blade has per inch. If you’re looking to cut wood or other soft materials, you’ll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable. The number of teeth can be found on the blade.
Can you put a wood cutting blade on a chop saw?
NEVER use a saw intended to cut metal (a chop saw) to cut wood (the proper term for this saw is a power miter saw). The two saws run at different RPMs and are designed and intended for different uses.
What speed does a circular saw run at?
Recommended Operating Speeds for Circular Saw Blades For extended blade life and quality of cut, saw blades should run between 10,000 and 18,000 SFPM (surface feet per minute).
How thick can circular saw cut?
Circular Saw Sizes Standard-size saws use 7 1/4-inch blades and can cut a maximum depth of about 2 1/2 inches. Compact saws can use anywhere from 3 3/8-inch blades up to 6 1/2-inch blades.
