Measure the distance between any 3 consecutive rivets that hold the chain assembly together. The rivets are noticeable between the drive links and the cutters – the cutting teeth that lie on top of the chain. The pitch, together with the number of drive links, describes the chain’s length when seeking replacement chains.
“Using the wrong size bar or chain can damage the chainsaw and injure the chainsaw operator,” says Vince Christofora of Woodstock Hardware. Read on to learn how to measure your chainsaw’s bar and chain. Sometimes called a chainsaw blade, the chainsaw bar is the metal “Arm” that holds and supports the chain during cutting.
The following explains how you measure a chainsaw chain and also includes some important tips for chain care. You may need to remove the chain to do this, but might be able to loosen the chain and then spin it above the bar to count. If you have ever wondered about what those numbers on a chainsaw bar meant, or was confused as to how you might match your existing chain to one in a store – worry no more.
how to measure chainsaw chain length Related Question:
How do I know the size of my chainsaw chain?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
How do you measure a Stihl chainsaw chain?
If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The last three numbers (or letters) denote characteristics of the chain.
Whats the difference between green and yellow Stihl chains?
Others will chime, looks like green is homeowner (and dirty condition) safety chain. That stays sharper longer in dirty conditions. The yellow looks like full chisel, cuts faster but dulls quicker. I like full chisel and just keep it sharp.
What size chain does a Stihl 036 use?
20″ Full Chisel Saw Chain for Stihl 036 Chainsaws – (20 inch, 3/8″ Pitch, 0.050″ Gauge, 72 Drive Links, CSC-D72) – UpStart Components – Walmart.com.
What do the numbers on a Stihl chain mean?
Find the gauge of the chain by locating the number stamped on the drive link. A 1 equals a 0.043-inch gauge, 3 equals a 0.050-inch gauge, 5 corresponds to a 0.058-inch gauge, 6 means the chain has a 0.063-inch gauge. A 0 means the chain has a 0.080-inch gauge, but this gauge size is found only on the Harvester chain.
Does chain length include clasp?
Measure the length with a ruler or tape measure. Do not forget the clasp in your measurement. The complete chain, including the clasp, should be measured because that is what determines how long it hangs. Do not include the length of any charm or pendant hanging from the chain.
How long should my chain be?
After a measurement is obtained, its a good idea to opt for a necklace size that is at least the second size up from your neck size. For example, if you have an 18 inch neck, you should probably choose a chain length of 20 inches or more. An 18 inch chain would feel too tight.
How do you measure a gold chain?
Take your necklace length (measured from one end of the clasp) and add it together with your neck circumference measurement. Then, you can determine how long or short a chain you should wear around your neck by using this formula: Length of your necklace + length around your neck = proper chain length for you to wear.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What is the difference between a R56 and a S56 chainsaw chain?
The difference is the width of the chain track. S56 is . 050″ and R56 is . 043″.
What chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).
What chainsaw chains do professional loggers use?
Full-chisel teeth chains are usually used by professionals on large saws. Semi-chisel teeth are rounded, so the risk of kickback is less, and they stay sharper longer. Semi-chisel teeth cut slower but are a better choice in dirty wood than full chisel.
What is full chisel chain?
A full chisel chain is designed for the fast cutting action. In comparison to the semi-chisel chain, this chain has square-cornered teeth which makes it more aggressive when cutting.
What does full chisel chainsaw chain mean?
Full chisel, semi-chisel, chipper The sharp corner of the full chisel cutters split wood fibers easily and provides the fastest, most efficient cutting in clean softwood. The corner of the cutters on a semi-chisel saw chain are slightly rounded.
Will a Stihl chainsaw chain fit a Husqvarna?
Unfortunately, you won’t be able to use Stihl chains on Husqvarna saws because of the difference in pitch sizes.