Bring the saw up to full speed, lift the guard, and slowly push the body of the saw down to start the cut. TIP: Make sure to start back far enough so that you only push the saw forward; never drag a spinning saw back. If a board is too wide for the saw shoe to hang over the edge during a rip cut, hold a narrow scrap of wood between thumb and forefinger, bracing your finger along the edge of the board, and butt the saw shoe against the edge of the wood scrap as you push both along the board.
Using a Circular Saw for All Kinds of Cuts Whether you’re cutting 2x4s to length, breaking down plywood sheets into a manageable size, creating joinery or making angled and beveled cuts, reach for a do-it-all circ saw. Tips for Using a Circular Saw Cut angles easier Cutting angles can be tricky because the blade guard often catches on the material as the saw begins to cut, even with a no-catch blade guard. Upgrade with a DIY Track Guide A simple and inexpensive track guide will let you cut straight, accurate lines with any circular saw.
how to pick circular saw Related Question:
How do I choose a circular saw?
The main things you should be looking out for when choosing a circular saw are cutting capacity, cutting depth and bevels. The capacity and depth of your cut with a circular saw is based on the size of the saw’s blade. In the case of our cordless circular saws, the blade is a standard 165mm.
Which size circular saw is best?
The most common and useful size for DIYers is 7 and 1/4 inches. Saws this size will cut through material more than 3-inches thick, and they also offer the widest variety of blade choices for cutting substances other than wood.
How many amps should a circular saw have?
Most circular saws use 15 amps, the lower common capacity of home circuitry, which corresponds to a maximum safe wattage of 1,440 watts. Some models use slightly less; for example, Ryobi’s CSB141LZK model comes in at 14 amps and Skil’s 5755 at just 13 amps.
What is the difference between circular saws?
Regular circular saws have an RPM of 6,000 or higher while worm drive saws have an RPM of not more than 4,500. This difference of RPM is however balanced when it comes to torque. Worm drive saws offer more durability and power because they have larger teeth which have a more loading capacity than regular circular saws.
Will a circular saw cut a 4×4?
Circular Saw. A circular saw is one of the best means of cutting a 4×4 post. Most people own a circular saw, its portability makes it easy to cut 4x4s from the ground, and they can make precision cuts by using a relatively simple trick.
Which saw should I buy first?
A jigsaw is great for cutting curves and shapes, and it can also be used with a guide to make straight cuts, which is why this is the first power saw you should own. Unless you plan to rip long sheets of plywood, a jigsaw is preferable over a circular saw.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
Can a 5 1/2 inch circular saw cut a 2X4?
Yes! A 5.5 inch circular saw blade is perfect for cutting a 2X4. The blade capacity is deep enough to make a crosscut in 1 stroke. If you want to make a 45 bevel cut then you will need to make 2 strokes.
How much electricity does a circular saw use?
A typical circular saw with a standard rating needs 2400 watts as its starting wattage, whereas the power required for running is 1200 watts. In other words, every time you switch on the saw, it will require 2400 watts to start spinning. After that, it will need approximately 1200 watts to stay spinning.
What size power inverter do I need to run a circular saw?
At a minimum to run a circular saw, you’ll need a 1500 watt inverter. Usually, inverters are able to deliver double peak power for a few seconds. This means with a 1500 watt inverter you get 3000 watt peak power to cope with a surge when starting your saw.
Is 13 amp circular saw good?
From cutting shelving to mitering trim, the SKIL 5080 7-1/4 inch Circular saw is a great entry-level saw in the home workshop. The 13 amp motor has the power and performance that you need, and the improved dust blower keeps line of cut free from sawdust for accurate cuts.
Is it okay to cut wet wood with a circular saw?
If you’re cutting wet wood set the depth so that the entire gap between the teeth is clear of the board you’re cutting. This will stop your saw and cut line from getting clogged with wet saw dust.
Which side should the blade be on a circular saw?
For blade-right models, the correct circular saw blade direction is usually with the label side out. For saws that have the blade on the left, it typically installs with the “ugly” side out.
Why are some circular saws left-handed?
The placement of the cordless saw blade, on the left side, gives you a clearer line of sight when you cut. The reason for this is because the main bulk of your circular saw is not blocking your view. Cordless circular left-handed saws provide you better movability.
How thick wood can a circular saw cut?
Generally, the blade of a circular saw can cut wood of thickness up to 2.5 inches. Depending on the thickness of the wood being cut, you need to change your blade’s depth. Since your wood is thick, ensure you are using Carbon-tipped blades. Use a crosscut blade for smoother cuts and rip blades for grain cuts.
