I planned to replace it once I settled into my new house, but when the time came to build a room divider/bookshelf unit, I decided to build a couple of my own makeshift circular saw guides instead. The guides are compact and store easily. It’s quick, safe and especially useful when you need to cut a sheet of plywood down to size or to rip a long straight edge on a wide piece of lumber to prepare it for further ripping on a table saw. The only difference is that I put a 1 x 2 stop on the bottom, perpendicular to the 1 x 4 guide, which automatically squares the guide across the piece being cut.
Ensure straight cuts with these two, simple cutting guides. With these two saw guides, you can use your circular saw to make cuts that rival a table saw’s for speed and accuracy. Like the straightedge guide, the crosscut guide is customized to your saw so you can simply line up the edge of the guide with your cutting mark and clamp it.
Making straight cuts in plywood is super easy when you have a straight edge to guide your saw. How To. See how easy and fast it is to make this Circular Saw Straight Edge Guide. Now you can have both of these cuts done for you at your home center, but if you have another sheet of plywood laying around that still has a straight factory edge on it, or another long straight edge, you can use that.
how to make a circular saw guide Related Question:
Is it a guardrail or guide rail?
Guard rail is more common, but guide rail is acceptable. According to the US Federal Highway Administration, “The terms guardrail and guiderail are synonymous, and are used in different regions around the country.”[4] Guide rail and guard rail are intended to steer and “guide” vehicles back onto the road.
Are saw guide rails universal?
The YouTool Guide Rail is universally suitable for almost all brands of saw, and is available up to 5 meters long.
When cutting plywood with a circular saw which side is up?
Also note that a circular saw cuts on the upstroke, which often splinters the top edge (veneer) slightly. The bottom edge usually remains splinter-free. So always cut plywood with the good side down.
How many teeth do you need for plywood?
Cross-cutting wood or sawing plywood: Use a 40-tooth to 80-tooth blade. You can use a 40-tooth to 50-tooth general purpose blade as well. Joinery work: Use a 40-tooth to 50-tooth all-purpose combination blade. Cutting MDF and man-made materials: Use a 50-tooth to 80-tooth blade.
Can you use a DeWalt circular saw on a track?
The DWS5022 is a reversible 1.5 metre track for use with the DWS520 plunge saws, as well as other DeWalt circular saws and routers. It features a support rail which runs up the middle and distributes weight effectively to deliver an accurate cut.
