With guided cutting, your saw follows a guide – either an edge guide or a track guide – to create the precise results you’re looking for. These solutions are portable, so you can easily set up your saw and guide wherever you’re building. Learn where each guide excels and find the right Kreg guide for your cutting needs.
“The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you want – up to 24” – using the built-in measuring scale, and then make your cut. Just lock the saw sled at your desired cut width, and you’re all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.
A circular saw is a super handy cutting tool for your DIY projects. Circular saws come with blades that are made for making fast cuts in framing lumber, not smooth cuts in project boards and plywood. With Kreg Guided Cutting, you can use an ordinary circular saw to make straight, precise, repeatable cuts because your saw will follow a guide – either an edge guide or a track guide – to achieve the high-quality cuts you need to for your projects.
Circular saws don’t have effective guides that keep them moving straight along a cut line. Together, these things make it challenging to keep a saw on your desired cut. The Accu-Cut™ is portable, too, so you can take your saw to the workpiece and cut with precision, rather than having to handle heavy sheets on a table saw.
how to use kreg circular saw guide Related Question:
How many teeth should my table saw blade have?
A 10″ cross cutting blade should have 60 to 80 teeth with an alternate top bevel grind (ATB for short). Pay attention to the grind on the teeth. If the 80-tooth blade you’re considering has a “Triple Chip Grind” (TCG for short) know that this blade won’t cross cut solid wood very well.
Is Kreg Accu-Cut worth it?
Kreg Accu Cut Review – Final Thoughts While it would be nice to have a tool-free option to set up, the setup is simple and quick. The quality of the cut is great and it’s very easy to use the system. While it should offer longer cut runs and you don’t have the ability to plunge cut, it’s worth every penny.
Does Kreg Accu-Cut Work with Milwaukee?
The Kreg Rip-Cut is designed to work with most full size corded 7 1/4″ circular saws. Unfortunately, it will not work with the Milwaukee m18 due to an obstruction on the saw plate at the front of the saw.
Does Kreg Accu-Cut Work with Dewalt?
the dcs572 base is compatible with dewalt rail but not sure about the accu-cut. Answer: The Kreg Accu-Cut is designed to work with most full size 7 1/4″ corded circular saws. We find that the system usually will not work with a cordless circular saw.
Are guide rails universal?
The YouTool Guide Rail is universally suitable for almost all brands of saw, and is available up to 5 meters long.
What can you use as a guide for a rip cut?
plywood with notches to fit 1/4-in., 1/2-in., 3/4-in. and 1-1/2-in. boards or plywood. The notches help hold the board tight to the saw table, and the top handle slides along the top of your fence.
What is a 80 tooth saw blade used for?
Crosscut blades, made for cutting across the woodgrain (across the face of a board), have between 40 and 80 teeth and are designed for clean cuts. Smaller gullets separate the teeth. Combination blades can make both rip cuts and crosscuts. They have multiple groupings of teeth separated by deep gullets.
Why does my circular saw burn the wood?
A dull blade will make it hard to cut quickly, and the slower the feed rate of the saw, the more friction against the wood and the greater the likelihood of scorch marks. Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty.
Are Diablo blades any good?
Diablo blades are available in a wide selection of sizes and styles and are easy to find online and locally at Home Depot. The consensus is that Diablo saw blades balance great quality with excellent value, and are a good choice when replacing or upgrading the OEM blades that are often bundled with new saws.
