Circular saws are used primarily for cutting wood, but with the right saw blade, you can cut a variety of materials. Saw blades spin forwards, which increases the risk of something projecting as the blade exits the wood. With all this power comes responsibility, so use your circular saw wisely and don’t cut corners, because if you do, it might not be the only thing you cut.
Before you begin cutting, make sure to set up the depth of the saw blade and the angle of the cut. Once your saw and material are set up properly, line the blade of the saw up with the line that you plan on cutting. If you try to start cutting before the saw has fully accelerated, you may experience kick back from the saw.
how to use a circular saw step by step Related Question:
How do you use a circular saw summary?
Using a Circular Saw Cut with the body of the saw on the side of the work piece that’s supported, not on the cutoff side. Push the blade through the cut and let the pieces fall. Release the saw trigger and let the blade come to a full stop. Most cuts you make with a circular saw will be crosscuts or rip cuts.
Which side should the blade be on a circular saw?
For blade-right models, the correct circular saw blade direction is usually with the label side out. For saws that have the blade on the left, it typically installs with the “ugly” side out.
Which way should the teeth face on a circular saw?
The teeth should be cutting UPWARDS, in a clock-wise direction. You’ll also notice that when your blade is installed correctly, the teeth will be pointing upward. Remember: circular saws (as most saws) cut on the upward stroke.
Why won’t my circular saw cut all the way through?
Here are some reasons your circular saw keeps stopping: Make sure your work piece is properly supported so it doesn’t pinch the blade which could also cause kickback in addition to stopping. Damaged, warped, loose or dull blade. Motor malfunctioning or overheating. Cable problems like frayed cord or weak connection.
Is it safe to use a circular saw with one hand?
One hand on the saw is not a safe work practice, especially not for someone who self-describes as a novice. Hang on solidly for a few years and then see if you want to adopt a few bad habits.
Should you wear gloves when using a circular saw?
Should You Wear Gloves When Using a Circular Saw? You should never wear gloves when you use a circular saw, as the fabric of the glove can get caught in the blades of the saw and pull your hand into the saw blade. Any kind of loose fabric can get caught in the moving parts of a circular saw and cause serious injury.
How do you use a circular saw without a sawhorse?
In some cases, it might be better to use your circular saw without a sawhorse. If you need to make cuts without a work support, you can lay a sturdy, stationary surface under the material while making cuts.
What is the difference between a circular saw and a table saw?
Circular saws are lightweight, hand-held, and can be moved from jobsite-to-jobsite with ease. A table saw is heavier and more complex in its set up. Because of its weight and footprint, this tool is more difficult to move these saws around as easily as you are able to do with a circular saw.
Why is my circular saw kicking back?
Overheating a saw blade can cause it to warp and result in a kickback. Buildup of sap on the blades, insufficient set, dullness and unguided cuts, can all cause an overheated blade and kickback. Never set a blade deeper than is required to cut the work piece 1/8 in. to 1/4 in.
When using a circular saw be sure to cut on the waste side of the cut mark to allow for the blades?
Never use a circular saw that does not have an upper blade guard because the. guard protects you from touching the blade. When using a circular saw,be sure to cut on the waste side of the cut mark to allow of the blade’s. Saws with fine blades that are excellent for delicate and intricate cutting are called.
Can you cut wet wood with a circular saw?
If you’re cutting wet wood set the depth so that the entire gap between the teeth is clear of the board you’re cutting. This will stop your saw and cut line from getting clogged with wet saw dust.
Why does my circular saw burn the wood?
A dull blade will make it hard to cut quickly, and the slower the feed rate of the saw, the more friction against the wood and the greater the likelihood of scorch marks. Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty.
Why are so many circular saws left-handed?
The placement of the cordless saw blade, on the left side, gives you a clearer line of sight when you cut. The reason for this is because the main bulk of your circular saw is not blocking your view. Cordless circular left-handed saws provide you better movability.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
Can you put a circular saw blade on backwards?
When cutting vinyl siding with a circular saw, install a fine-toothed blade backwards on the saw for a smoother, cleaner cut, especially in cold weather (when the material is brittle).
