More info about how to change circular saw blade skilsaw

how to change circular saw blade skilsaw Related Question:

How do you loosen a blade on a skilsaw?

Press down on the saw’s arbor-lock button and rotate the blade until the locking mechanism engages. Use the blade wrench to remove the arbor nut holding the blade in place. To loosen the nut, turn the wrench in the same direction as the blade cuts. Retract the saw’s upper blade guard and remove the old blade.

Where is the arbor lock on a circular saw?

Place the saw on a wooden surface and pull back the blade guard. If the saw has an arbor lock button on the top of the housing, press it in. The arbor is the shaft the blade installs on. If there’s no lock button, press the blade into the wooden surface.

Which way does a saw blade spin?

Like miter saws, table saw blades rotate clockwise, meaning the teeth should be pointing down.

Which way do the teeth go on a circular saw?

The teeth should be cutting UPWARDS, in a clock-wise direction. You’ll also notice that when your blade is installed correctly, the teeth will be pointing upward. Remember: circular saws (as most saws) cut on the upward stroke.

Can Worx circular saw cut metal?

Metal Cutting Circular Saw Blades Beyond cutting wood, you can also use your circular saw blade for cutting metals.

Can a mini circular saw cut a 2×4?

The new WORXSAW new Compact Circular Saw is capable of cutting a 2×4 in a single pass. The compact circular saw features a 4-1/2 in. blade that is up to 50 percent lighter than a full-size 7-1/4 in. circular saw.

Leave a Reply

Your email address will not be published. Required fields are marked *