Knowing the available chainsaw oil options, learning how to choose the right one and determining the right fuel/oil ratio can help ensure your chainsaw runs smoothly every time. Common Issues if Chainsaw Oil Is Bad. Chainsaw engine oil can go bad. Two-cycle oil is good for up to five years when sealed, and many manufacturers list the oil’s shelf life on the container. “One thing we do for our customers who buy a chainsaw that requires an oil/gas mix is we have them buy a gas can and we write the formula right on the can with a big black Sharpie. Then, the next time they need to make the mixture, they can dump in the right amount of oil and take the can to the gas station and pump in the right amount of gas.”
Understanding your chainsaw oil will help you make the right decision when it comes to purchasing the right type of oil and making sure your chainsaw is properly maintained. We’re going to discuss everything you should know about chainsaw oil today, which should help you realize how important it is if you want to keep your chainsaw running properly for years. Chainsaw oil isn’t as cheap as oil you could make yourself at home, but you’ll have to ask yourself if it’s worth the short term gains.
Chainsaw bar oil is a necessary component to operating your chainsaw at peak efficiency and with safety in mind. Formula Chainsaw bar oils are either petroleum-based or bio-based. ‘ Chainsaw bar oil for winter is usually 10W. Very hot temperatures may call for a thicker chainsaw oil, in the 40W to 50W range.
In this post, we’ll explain chainsaw oil mix ratios, offer a solution to mixing multiple fuel cans and take a look at what we think is the best 2-stroke oil for your chainsaw. Two-stroke engines derive lubrication from the oil mixed directly into the gasoline, unlike your car engine, which lubricates itself with oil housed in an oil sump and circulated by an oil pump. Some equipment manufacturers recommend different chainsaw oil mix ratios.
Unless you have a stockpile of gear oil available if your chainsaw oil runs out, it’s not a sound economic decision to buy gear oil as a backup. We recommend turning to canola oil as the best chainsaw bar oil substitute on our list. Chainsaw bar oil substitutes that derive from vegetables like canola oil are the best for your chainsaw.
is all chainsaw oil the same Related Question:
What kind of oil do you use for a chainsaw?
Petroleum-based bar oil has been the standard for chainsaws. Lightweight oil is used in winter and heavier oil in summer. Manufacturers of chainsaws make bar and chain oils specially blended for their machines to extend their lifespan, but if they are not available, the owner’s manual suggests alternatives.
Can I use any oil in chainsaw?
Generally, chainsaws can handle a wide range of lubricants. Vegetable and canola oils work well, and automobile motor oil will too, as long as you observe the SAE ratings and use the appropriate oil weight for the season. Always use fresh, never used, oils.
Does a chainsaw need special oil?
To run properly, all chainsaws need two types of oil for different jobs. The first is engine oil. The chainsaw shown here has a two-stroke engine, so it needs two-stroke engine oil mixed with the fuel to help cool and lubricate the moving parts inside the motor.
Can I use a Husqvarna chain oil on a Stihl?
Can I Use A Husqvarna Chain Oil On A Stihl? The Husqvarna premium bar and chain oil is made of high quality materials: Totally suitable for use with all brands of gas-powered Stihls and electric Makita chainsaws.
Can I use 10w30 for chainsaw bar oil?
As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil. That’s because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.
What is the difference between chainsaw oil and motor oil?
Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.
Do Electric chainsaws need bar oil?
Electric chain saws derive their power from an electric source, so they don’t need fuel to run. Most gas chain saws require a premixed gas-and-oil fuel to operate properly. Electric chain saws don’t require this added oil, but the bar and chain do need to be properly lubricated.
What is special about chainsaw oil?
Chainsaw bar oil has a certain level of “slickness” to it. This slickness keeps the chain spinning at a fast rate without getting slowed down by the friction that occurs when metal rubs against metal. So, if you want to use the “correct” type of bar oil in your chainsaw, consult the manual and use what it suggests.
Can you use transmission fluid for chainsaw bar oil?
On occasion I’ve used tranny fluid to clean out old oil residue in old chainsaws . It works well . In addition to that tranny fluid seems to pump better on some saws with whimpy oilers in cold weather .
How much bar oil should a chainsaw use?
When to Oil Gas chainsaws use about one tank of bar and chain oil for every tank of fuel, so fill the reservoir every time you fill the tank.
Can you use 10w40 in a chainsaw?
You can but it’s not very good for the chain or the environment. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn’t fling off the chain as easily or poison your garden! 10w30. Thicker.
What kind of oil does a Husqvarna chainsaw use?
Husqvarna Recommendations The company recommends the Husqvarna XP Professional Performance brand of synthetic two-cycle engine oil, mixed at the 50-to-1 ratio of 2.6 fluid ounces of oil to 1 gallon of unleaded mid-grade gasoline.
Can I use canola oil for chainsaw?
Yes, I am still using canola oil exclusively for the chainsaw. It’s works just fine, and empties out in parallel with the gas, same as chain oil. I’ve dome some chain saw milling also, and still use the canola oil. Will never go back to chain oil.
What weight is bar chain oil?
Once temperatures rise, switch back to your standard bar and chain oil, which may be anywhere between 20 and 50 weight (30 weight is standard). Using winter oil during summer might leave a lot more oil on the ground because the thinner oil won’t adhere as well to the bar and chain.
Can you use vegetable oil in a chainsaw?
Kitchen oils are not necessarily designed for use on a chainsaw in the long term which could cause maintenance issues, so we’d recommend the use of a vege oil designed for your chain.