Generally, a fully functional chainsaw should cut straight and smooth, but if this does not happen, your chainsaw is likely to be faulty. The chainsaw bar can cause the chainsaw not to cut woods straight. The first step to solving any chainsaw problem is to understand the type of chainsaw suitable for your needs and how it operates.
Dull cutters damaged by rocks can cause a chain to cut crooked. It’s important to remove all damage from cutters prior to cutting. Cutting with a dull chain can accelerate wear to the bar and chain.
One of the most common mistakes users make when first using the sharpener is not leveling it correctly on the bar. First, as the sharpener rocks on the carbide try to visually level the sharpener flat on the bar and tighten the side screws. Remove carbide, pull chain forward to test that it moves freely through the tool. If it doesn’t fit, loosen the side screw and move the sharpener up or down as needed to allow the carbide to be fully inserted.
The most probable reason why a chainsaw pulls either to the right or left during a cut is because it was sharpened unevenly. Keep working the side which you feel lacks attention, and eventually the chainsaw should start going as straight as new. The teeth have to be equally sharp on each end to make the chainsaw work straight.
my chainsaw is cutting to the right Related Question:
Why is chainsaw cutting to the right?
When you notice your chainsaw pulling to one side as you cut, or your chainsaw is cutting crooked, it’s likely there’s an issue with the chain, advises Madsen’s Shop and Supply. Check the size of the top plates, which sit on the longer sections of each tooth on the chain. These top plates should be the same size.
Why does my chainsaw bog down when cutting?
The reason for that may be you’re using the saw at altitude or the carburetor adjustment has simply slipped. The saw also won’t operate well at speed if the air filter or spark arrestor or carburetor are dirty.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
Why does my electric chainsaw keep stopping?
If your electric or gas saw’s chain won’t turn around the bar, chances are that the chain brake is stuck. On some saws, resetting the chain brake is as simple as pushing in on the side cover of the saw’s body with one hand, and pushing the chain brake forward while grabbing the top handle with the other.
Why does my chainsaw rev too high?
The throttle valve (butterfly) simply cuts off the supply of combustible air/fuel and the engine stops. If this adjustment is set too high, the high idle speed will cause the centrifugal clutch to engage and the chain will run. This is a dangerous condition and should never be allowed.
How often should you flip the bar on your chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
Can you cut with both sides of a chainsaw?
A chainsaw is one of the most versatile tools you can own, but it cuts both wood and flesh equally well.
What happens if you file rakers too low?
If the rakers aren’t at the right depth, your saw won’t self-feed and you’ll find yourself pushing down on the saw as you cut. That not only wears you out, but it wears out the bar and chain as well.
Why is my electric chainsaw smoking and not cutting?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Do electric chainsaws overheat?
Electric chainsaws tend to overheat when used extensively, or when they are not assembled properly. This could be due to a loose part that missed while assembling the saw or a lack of lubrication that creates heat due to friction between parts.
Why does my chainsaw cut out when revved?
If the filter becomes clogged, not enough fuel will reach the engine for it to run properly. Because your chainsaw will idle, but dies when it is revved up to full power, it means that the filter is only partially clogged; it will allow enough fuel to the engine to run on idle, but not enough to sustain full throttle.
Why does my chainsaw only runs on choke?
When your chainsaw only runs if the choke is on the problem, in most cases, is a result of fuel supply problems or a faulty carburetor. To fix the problem you should check and clean the fuel system and carburator.