325.058 94 DL FC drive links fits a few imported saws.325 pitch.
S3 8AG. Optimised for maximum performance, Rotatech chains are fine-tuned to deliver the best cutting results possible. With over 6,000 models to choose from, Rotatech chains will enable your chainsaw to deliver better performance throughout its working life. In collaboration with professionals in the arboriculture industry, Rotatech chains have been tested and developed to ensure they optimise your output.
Access to this page has been denied because we believe you are using automation tools to browse the website. Please make sure that Javascript and cookies are enabled on your browser and that you are not blocking them from loading.
94 link chainsaw chain Related Question:
Does number of links matter on chainsaw chain?
Chainsaws are designed to use a specific size of bar with a specific chainsaw chain link count. For heavier jobs like felling trees or bucking logs, it might be better to have a longer chain with more links – but this will make it slower and less agile.
Is it better to have more links in a chainsaw chain?
The greater distance between links makes for more aggressive cutting. When a chainsaw chain’s pitch measurement is displayed on the tool, it is usually on the guide bar, towards the user-end of the tool. So, for a 3/8″ pitch chain, the measurement between three links would be 3/4″ (.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
What chainsaw chains do professional loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What does 72 mean on chainsaw chain?
For chainsaw models that run 3/8 Inch Pitch, .050 Inch (1.3 mm) gauge, 72 drive links. Precision, heat-treated semi-chisel chain cuts smoothly with a higher tolerance for debris.
What does the gauge mean on a chainsaw chain?
The gauge of a chain refers to the thickness of its drive links. It is determined by measuring the portion of the drive link that fits into the groove of the guide bar. It is usually expressed in thousandths of an inch: . 050″ or . 063″.
What does the number on a chainsaw chain mean?
If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The first number represents the pitch: 1 = 1/4″ 2 = 0.325″
How many links does a 14 chainsaw have?
Oregon S52 AdvanceCut Chainsaw Chain for 14-Inch Bar -52 Drive Links – low-kickback chain fits Dolmar, Ryobi, Echo and more.
How many links does a 18 inch chainsaw have?
0.050 Gauge 0.325 in. Pitch Chainsaw Chain, 72 Drive Links.
Are .325 and 3/8 chains interchangeable?
You can replace a 3/8 Oregon PowerMatch nose with a . 325 PowerMatch nose on any length of Oregon PowerMatch bar you want. Then when you use up the . 325 chain just put the 3/8 nose and rim sprocket back on.
What is the difference between full chisel and semi chisel?
The sharp corner of the full chisel cutters split wood fibers easily and provides the fastest, most efficient cutting in clean softwood. The corner of the cutters on a semi-chisel saw chain are slightly rounded.
What is the correct file size for 325 Stihl chain?
325″ Pitch Saw Chains. STIHL Files come specifically designed for each pitch of saw chain, with this particular round file suited for use with a . 325″ pitch chain. The file size is 4.8mm x 200mm.
What is a 420 chain?
– All PEER roller chains incorporate solid rollers enhancing rotation on the. bushing while reducing impact loads on the sprocket tooth during operation. – All chain components are heat treated to achieve maximum strength. and greater wear resistance.
Will a 520 chain fit a 530 sprocket?
The OP asked if a 520 sprocket could be used with a 530 chain, the answer to this is yes it can without any ill side effects, its not any more likely to jump off than if it were on a 530 sprocket.