You can make straight cuts with a circular saw, a table saw or a chop saw. When cutting with a circular saw, this means turning the board over and cutting from the back. When cutting with a table saw or chop saw the board should be face-up.
If you want to achieve a professional quality of woodworking, you have to use the best saw blade for laminate flooring, and I will gladly assist you. The laminate flooring saw blade can be used with both table and miter saws that have a standard 5/8″ arbor or a 13/16″ diamond-shaped arbor. In case you are careful enough and know how to treat saw blades, you can buy this 10 inch laminate saw blade even for your first laminate flooring experience.
The flooring saw is an effective way to cut your laminate boards when installing a floor. If you compare a table saw and miter saw, the former is best for long straight cuts whereas miter saw works best for angular cuts. Following are some of the best blades to cut laminate flooring.
Circular saws are great for cutting laminate flooring as they are portable and give you more control over your cut, by using the saw with one hand you can hold the piece of laminate flooring steady for a straight cut, the only downfalls are that they are not the best for accuracy and long rip cuts without a rail guide. If it’s your first time cutting laminate flooring with a circular saw you might be a little overwhelmed but not to worry, once you have the right blade on hand for cutting laminate you are ready to go. Tips For Using a Circular Saw To Cut Laminate Flooring Measure right – Stick by the rule of measure twice and cut once, if you mess up your measurements when cutting flooring then it will lead to an unprofessional look with uneven edges.
what circular saw blade do i use for laminate flooring Related Question:
What circular saw blade do I need for laminate?
What blade should I use to cut laminate countertop? If you use a circular saw, it’s best to use a fine-toothed narrow blade with at least 40 teeth. When it comes to cutting laminate countertop, blades with carbide tips usually last longer than regular steel.
Can I use a circular saw to cut laminate flooring?
A Circular Saw: You can also use a circular saw but it will require additional tools like a square and some type of work surface to cut the laminate flooring on. Sawhorses and a piece of plywood would make a pretty ideal workbench for this task and would be the easiest and most convenient method, in my opinion.
What blade do you use to cut laminate flooring?
Carbide tipped blades are best when cutting laminates and harder exotics. Quality blades can be re-edged or sharpened several times saving money. Blades having expansion slots are designed to greatly reduce heat-warping allowing the metal to cool thereby extending the life of the blade.
How many teeth blade for laminate flooring?
Diamond-tipped blades that are made for laminate and fiber cement usually have a low number of teeth to reduce the dust produced by cutting cement. However, typical circular and miter saw blades that are used for laminate will have 80 to 100 teeth for fine, precision cutting.
Can you use a circular saw to cut vinyl plank flooring?
Circular saws can and often are used to cut vinyl plank flooring, and if you have this type of saw in your garage or woodshop, it can be used very successfully to cut this material.
Does laminate flooring dull saw blades?
You see, laminate flooring will destroy a wood cutting blade with alternating top bevel (ATB) teeth in no time at all. The sharp points on this type of blade can’t handle anything that hard – they dull quickly and those tips are what the blade uses to cut cleanly through wood.
How do you cut laminate flooring with a utility knife?
After marking the board on the laminate on the plank, you can use the utility knife to score a line directly across the plank. It is best if you use a straight edge for this purpose and you can even slightly move the straight edge about 1/16 of an inch to make the cut a little wider.
Do you need a special blade for cutting laminate flooring?
The main issue when cutting laminate flooring isn’t the type of saw you use but the type of blade. Any saw that cuts wood will cut laminate, but to avoid chipping the hard plastic surface, the blade should have the the maximum number of teeth available.
Can I use a miter saw to cut laminate flooring?
The easiest saw to use for cutting your planks to length is a power miter saw, or chop saw. These saws are available with 8- to 12-inch diameter circular blades. You can cut the material in one motion, and the fence aligns the material to the blade for a perfect cut every time.
What is the best saw for cutting laminate flooring?
A jigsaw is a real all-rounder when it comes to cutting laminate floors. It’s best used to cut out shapes from your board. For example, when you want to place boards around your toilet or maybe a pillar. Always use a fine toothed blade and have the saw blade spinning before you touch the board.
Do you cut laminate flooring face up or down?
If you use a jigsaw blade with downward oriented teeth, you should place the boards with the face up. In this manner the saw won’t chip the edges and you will get proper cuts. If you have a blade with upward oriented teeth, you should place the laminate planks with the top-face down.
Do you cut the tongue off the first row of laminate?
Place the first plank with the tongue side towards the wall, being sure to allow 1/8″ for expansion. We recommend cutting off the tongue on this first row to avoid any problem with the expansion gap. Insert the second plank into the first at an angle pressing the short ends together; then press it down.
