Anytime you work on your Homelite chainsaw, turn the motor off and remove the spark plug wire from the plug. The spark plugs need a gap of.025 inches to function properly. The spark plug is a Champion CJ6, and the spark plug gap is.03 inches.
01-12-2005, 03:43 AM #6 Danny, I’m pretty sure that the manual for Homelite will tell you 50:1 2.6 Oz/ Gallon If you use homelite 2 cycle oil. 01-12-2005, 09:41 PM #8 Danny, I’ve got a SuperXL2 from the ’70s. Good running saw but it absolutely will not start without fresh fuel. For it I use Homelite oil and mix per the directions on the bottle.
what is a chainsaw spike bumper Related Question:
What are chainsaw spikes used for?
A bumper spike is used to rest the chain saw on wood as you are cutting to prevent kickback, especially when performing a buck cut. An anti-kickback chain reduces the forces on the chain that cause kickback. A tip guard at the end of the chainsaw bar helps prevent kickback.
What are the dogs used for on a chainsaw?
Chainsaw dogs provide stability and serve as a sort of fulcrum for swinging the bar through the item being cut.
Why do chainsaws buck?
If a log is not sitting firmly on the ground when you cut, the downward force can cause the log to close up on your chain. Pinching of the blade is more likely to occur when you’re cutting from the top down.
What is a buck cut?
The process of cutting a tree into usable lengths is called bucking. Bucking often occurs as a tree is being limbed, such as when the limbs of the crown are to be used as firewood.
What are metal bucking spikes on a chainsaw?
Bumper Spikes: This series of sharp metal spikes protruding from the saw near the base of the bar provide leverage for easier, more controlled sawing. Jab the spikes into the log, then pivot the bar downward to guide the chain through the cut.
What are the claws on a chainsaw called?
Re: Chainsaw dog teeth We call those teeth “bucking teeth”. They are handy when bucking a “big” log or for felling You don’t have to jam them into the wood. They offer enough resistance to the saw rising in the cut to allow for a little more aggressive sawing with a lot less effort.
What are the teeth on the front of a chainsaw called?
The Cutter Teeth The cutter teeth come in two parts; right-hand and left-hand cutters. These teeth are the meat and bones of your chain. They are the cut force of the blade itself and chip away at the wood you are using your chainsaw on. Cutter teeth come in different types too, which are called cutting tooth profiles.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
What are felling dogs made of?
These oversize falling or felling dogs are made of sturdy 1/8″ thick heat treated steel. They make ratcheting into stump a lot easier without the bending or wobbling of stock dogs.
What are felling dogs?
4-Point professional felling dogs (bumper spikes) for Stihl and Husqvarna chainsaws. These felling dogs are over sized compared to stock to give you better sticking power and leverage in thick barked trees. Pro Safety felling dogs are made of 1/8″ heat treated steel and are sold as a set (inside and outside dogs).
Can chainsaws kick back?
Kickback is a term used to describe the sudden, upward motion of a chain saw’s guide bar and is one of the most common causes of chain saw accidents. If proper cutting techniques are not followed, the lightning-fast kickback of a chain saw can be very dangerous and may result in serious injury.
Can electric chainsaw cut trees?
Although electric chainsaws are smaller and easier to carry, most lack the power and stamina to cut down large trees. If you have big trees on your property that you want to remove or cut into firewood, a gas model is your best bet. Electric chainsaws come in two types: corded and battery-powered.
What is skidding a tree?
A skidder is any type of heavy vehicle used in a logging operation for pulling cut trees out of a forest in a process called “skidding”, in which the logs are transported from the cutting site to a landing.
What does buck your hips mean?
be silent, stop talking etc.
What should you not do when a tree falls off?
When cutting up a felled tree, avoid touching the ground with the chain because even a brief encounter will severely dull the cutting teeth on your chain saw. If possible, cut partially through the tree and then rotate it to cut the rest of the way through.