Check the chain: With the bar removed from the chainsaw and chain took off, hold the chainsaw at your eye level and look straight along the groves of the bar. Once you have identified that you need to replace the bar on your chainsaw the next step is the actually replace the bar itself. If you are looking for a general idea for how often you should replace a chainsaw bar, a rule of thumb is to replace the bar of your chainsaw once after you have gone through three chains on the same bar. Before removing the bar you have to push the bar backward to reduce the tension on the chain and simply remove the now loose chain and bar completely by sliding the bar off the adjustment posts. After installing a brand new bar on your chainsaw make sure that the bar oil reservoir is full so that it can lubricate the new bar properly. While physical damage to the bar can be visible the signs of wear are not that easy to detect which is why chainsaw operators can’t spot a worn-out bar in time. Make sure to keep the bar clean and periodically remove any debris stuck between the groves of the bar to make the bar lasts a long time.
If there is a pointy edge on the Bar of your chainsaw or any cracks or cuts are there in the middle of the Bar, you may face that type of disturbance. Sale.Bestseller No. 3.Last update on 2022-03-24 / Affiliate links / Images from Amazon Product Advertising API.Chainsaw Bar Maintenance TipsEach time you use the chainsaw, fill it up with fuel and bar oil. It would better if you replace the Bar from time to time when you replace your chainsaw chain.
If you have a replaceable tip sprocket bar you can simply replace the tip of the bar. A chainsaw guide bar will last for years as long as the chainsaw is oiling properly, the chain is in good condition and the sprocket on the chainsaw is in proper condition. The chainsaw sprocket needs to be in good condition so as not to apply uneven pressure on the guide bar which can lead to a bar needing to be replaced faster than it should.
Hidden behind the sprocket cover, the chain sprocket is the driving force behind the chain. A seriously worn chain sprocket can cause the chainsaw chain and guide bar to wear at an increased rate, as well as reducing cutting performance too, so it’s important to keep an eye on. If the groove depth is too small, the tips of the drive links will scrape along the bottom and drastically impact how smoothly the chain moves around the guide bar.
Another sign that indicates its time to replace the chainsaw bar are the inside rails of the bar. Worn inside rails are a clear sign that you need to replace the chainsaw bar. Simply put, knowing when to replace the chainsaw bar is dependent on your knowledge of how to effectively inspect the bar for wear and damage.
when does a chainsaw bar need to be replaced Related Question:
How long does a chainsaw bar last?
Re: how long does a bar last The next, a Granberg, lasted about 2 months. About that time Stihl started using them with the same results. A good bar can be filed a few times on both sides and the tip replaced when needed. They could last almost as long as the saw.
Why do you need to replace chainsaw bar?
The chain sprocket must be replaced if the depth of the wear marks reaches about 0.5mm, i.e. the wear limit. A seriously worn chain sprocket can cause the chainsaw chain and guide bar to wear at an increased rate, as well as reducing cutting performance too, so it’s important to keep an eye on.
How often should I flip my chainsaw bar?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
Why is my chainsaw bar smoking?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Can you drill holes in chainsaw bar?
Re: Drilling a Chainsaw Bar Drilling that bar may not be as difficult as you think. It will be best if you use a drill press, start with a pilot hole, and then drill to the size you need. Make sure you have a sharp bit, run at the lowest speed you can, and use cutting fluid.
Are chainsaw bars hardened?
The solid chainsaw bar production begins with a solid bar of steel. The machine laser cuts the steel to the desired basic shape. That includes the outer contour, bores, and elongated hole. Looking at the process, the laser makes very little waste in the cut, and Stihl even reclaims the leftover steel.
How many times can you sharpen a chainsaw?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.
Can a bent chainsaw bar be straightened?
Solid body bars with replaceable noses can be straightened by hammering with the bend peak up on a flat anvil. Laminated bars need a piece of rubberized belting of approximate 1/4″ thickness between bar and anvil to properly hammer straighten .
Why is my chainsaw burning the wood?
Your chainsaw burns wood because of poor lubrication Lubrication allows the mechanical parts to coordinate much better by avoiding a phenomenon of friction which risks causing traces of burns. This is one of the main reasons that your appliance gives off too much heat and that the wood burns.
Why do loggers Run chainsaw bars upside down?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
Why does my chainsaw blade dull so quickly?
Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.
What chainsaw chains do professional loggers use?
Full-chisel teeth chains are usually used by professionals on large saws. Semi-chisel teeth are rounded, so the risk of kickback is less, and they stay sharper longer. Semi-chisel teeth cut slower but are a better choice in dirty wood than full chisel.
Why does my chainsaw cut on an angle?
Check the size of the top plates, which sit on the longer sections of each tooth on the chain. These top plates should be the same size. If some are shorter than others, file the longer ones down to match. Keep the same angle on all the top plates as you file – angles that don’t match also can cause curved cutting.
Can you cut a stump with a chainsaw?
A chainsaw, however, can grind up a stump and leave it all but gone; still, you can’t use a chainsaw to completely grind away a stump. After much of the stump is gone, however, dirt and other material can cover the stump so it won’t be noticed.
What is dressing a chainsaw bar?
A tool designed to preserve your guide bar. This maintenance tool removes normal wear and minor damage as it dresses your bar rails back to a 90-degree square edge. Redress your STIHL chain saw guide bar rails to 90 degrees to keep the saw chain cutting straight.