Normal wear can make it difficult to accurately measure chain gauge on a worn chain. “Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches – 1/4″ is the smallest, 3/8″ is the most popular, and 3/4” is the largest. Saw chain sequences include: standard, semi-skip, and skip.
Read on to find out how to choose the right chainsaw chain for your chainsaw. Using a 1.1mm chain in a 1.3mm guide bar will cause the chain to lean side to side, and increase the risk of the chain coming out of the guide bar. Once you have the right chainsaw chain, it’s simple to change the chain.
There are a seemingly limitless number of combinations of chainsaw chains with varying size, type and features. Your first port of call should always be to look at your manufacturer’s manual, as this will have the specific instructions on the types of chains that will fit on your chainsaw. Beyond that, here is our quick checklist that should help demystify replacing your chainsaw chain.
which chain for chainsaw Related Question:
How do I know what chain to get for my chainsaw?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
Does any chain fit any chainsaw?
No, chainsaw blades are not universal, not every bar and chain will fit on your machine. Chainsaw chains need to have the correct specification to fit on your bar. If you have a chain that is too long or too narrow it will not fit. Mixing brands of chains is no problem as long as they are compatible.
What is the most common chainsaw chain?
Most saws use 0.325″, 3/8″, or 0.404″ pitch, with 1/4″ less common. Most consumer saws use a type of 3/8″ chain called “low profile”. We call it Picco. A few older saws use 1/2″ pitch chain.
Can I use a different brand chain on my Stihl chainsaw?
Stihl manufacturers replacement parts, including chains, as well as chain saws. Stihl recommends using its own chains as replacements, but after-market manufacturers produce similar chains that may be used on a Stihl chain saw.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What is the difference between a R56 and a S56 chainsaw chain?
The difference is the width of the chain track. S56 is . 050″ and R56 is . 043″.
What do Stihl chain numbers mean?
Find the gauge of the chain by locating the number stamped on the drive link. A 1 equals a 0.043-inch gauge, 3 equals a 0.050-inch gauge, 5 corresponds to a 0.058-inch gauge, 6 means the chain has a 0.063-inch gauge. A 0 means the chain has a 0.080-inch gauge, but this gauge size is found only on the Harvester chain.
What do chain numbers mean?
Chain Dimensions The digits to the left indicate the pitch of the chain in eighths of an inch. For example, a number 40 chain would have a pitch of four-eighths of an inch, or 1/2″, and would be of the standard dimensions in width, roller diameter, etc.
What is a 420 chain?
– All PEER roller chains incorporate solid rollers enhancing rotation on the. bushing while reducing impact loads on the sprocket tooth during operation. – All chain components are heat treated to achieve maximum strength. and greater wear resistance.
Is 40 and 41 chain the same?
The differences between 41 roller chain and 40 roller chain are the roller width and diameter, plate height and thickness, overall width, and tensile strength.
What is metric chain?
metric (SI) units. 20.1168 m. The chain is a unit of length equal to 66 feet (22 yards). It is subdivided into 100 links or 4 rods. There are 10 chains in a furlong, and 80 chains in one statute mile.
Does the number of links in a chainsaw chain matter?
Number of links is to fit the bar – pitch is to fit the sprocket. Show activity on this post. Since the number of links is larger(81 instead of 74), there is low chance that it would fit properly.
Do Oregon chains fit Stihl saws?
Oregon R55 AdvanceCut Chainsaw Chain for 16-Inch Bar -55 Drive Links – low-kickback chain fits several Stihl models. This product is only available through retailers or servicing dealers. Designed to fit most chainsaw models that require a 3/8 Inch low-profile pitch, .
Does gauge matter on chainsaw chain?
The gauge measurement of a saw chain tells a pro user about the strength of a chain’s drive links. Thicker drive links are usually stronger, but they are heavier. Weight affects performance, and to maximize cutting speed, weight should be kept to a minimum.