Yup, you heard me, circular saw can easily cut drywall but cutting the drywall is not the only thing you should be caring about. Let’s find out why you should never cut drywall with a circular saw and what will happen if you try to cut it using the mentioned tool. A drywall saw is a tool that’s designed to cut through different types of walls, which makes it perfect for people who want to install a new piece of drywall in their house.
Professional drywall hangers use a regular razor knife to make straight cuts on drywall. HOLD THE DUST.To cut a straight line with drywall and create minimal airborne dust, you just score one side of the drywall with a sharp razor knife. You finish the cut by simply cutting through the paper backing on the other side of the drywall panel.
Here are the 6 best tools for cutting drywall according to the Pros. Be sure to check out our 6 methods for cutting drywall article as well. We hope you’ve gained some knowledge from the 6 best tools for cutting drywall.
what circular saw blade for drywall Related Question:
Can you use circular saw to cut drywall?
First, don’t use a circular saw to cut drywall. It’s like using a rock to hammer nails. Both are the wrong tools for the job. A circular saw creates giant clouds of unnecessary dust.
What kind of blade do you use to cut drywall?
The Razor Knife The most commonly used tool for cutting drywall is the razor or utility knife. You score the panel, apply some pressure, and snap! You’ve got a new, clean edge.
How many TPI do I need for drywall?
Teeth Per Inch (TPI) Drywall saw blades usually have between 6 and 8 teeth per inch. The teeth tend to be extremely sharp, with relatively deep gullets. This is so the blade can cut quickly and aggressively through material, removing more waste material with each stroke.
What is the purpose of drywall saw?
A keyhole saw (also called a pad saw, alligator saw, jab saw or drywall saw) is a long, narrow saw used for cutting small, often awkward features in various building materials. There are typically two varieties of keyhole saw: the fixed blade type and the retractable blade type.
Can I cut drywall with a jigsaw?
A utility knife saw blade, drill with a drill bit, marking tools, and drywall rasp are all helpful when it comes to cutting sheetrock. A jigsaw can cut a variety of holes in drywall including standard, rectangular, and plunge cuts.
Is there a difference between sheetrock and drywall?
Drywall is a flat panel made of gypsum plaster sandwiched in between two sheets of thick paper. It adheres to metal or wood studs using nails or screws. Sheetrock is a specific brand of drywall sheet. These terms are often used interchangeably.
What side of drywall do you score?
In most cases, drywall is cut by scoring through the paper on the finish side (the one with white paper) using a sharp drywall knife. As soon as you notice the blade dulling, turn it around or replace it.
Why is it called a key hole saw?
A related type of saw used for very different work is the keyhole and pad saw. A keyhole and pad saw is used for cutting interior circles and other shapes that are much smaller than an ordinary compass saw could accomplish, hence the name “keyhole.” The “pad” refers to the handle of the saw which holds the blade.
Can an oscillating tool cut drywall?
For getting precise cuts in less time, an oscillating multi-tool is the best tool to cut drywall with. Your other drywall cutting tools might still come in handy for some of your cuts, but an oscillating multi-tool can be great for long, straight cuts as well as smaller precision cuts.
What happens if drywall is installed backwards?
If you hang drywall backwards, the rougher backing material will be visible through paint. Also, drywall has beveled edges that ease the process of drywall finishing. Drywall finishers embed paper drywall tape along the seams, so installing the tape within the bevel makes the taped seam rest below a flush level.
Can you cut a circle with a Sawzall?
Use a Sawzall and Protractor A no. 2 pencil just isn’t going to do the trick: you want to be as accurate as possible. Simply use the sawzall to cut around the edges of the marking. When you’re done, hit the edges with a light 80 grit sandpaper to buff out any imperfections.
