Circular saws cut on the upward stroke, which means that they rotate in a clockwise fashion, cutting from the bottom up. This is why when you’re using a circular saw, the side of the wood that will be your “good” side should be facing down.
When I first started using circular saws, what I knew about the circular saw blades was this: how many teeth the blade has and the size of the blade. Back in the spring, I had the opportunity to peer over the shoulder of a demo guy at a Diablo circular saw blades booth at a Home Depot event and was mind-blown at how he was slicing through thick metal like the circular saw blade was a hot knife through butter. Before jumping into which way to insert a circular saw blade when changing the blade, let’s first talk about which direction the blade of the saw actually cuts.
Most of us have been there at some pointstaring at a blade in one hand and a saw in the other wondering what the correct circular saw blade direction is. Getting the circular saw blade teeth going the correct direction is what’s at the heart of the matter. The saw’s motor runs the blade rotation in a way that the circular saw teeth direction points up as it enters the wood you’re cutting.
A circular saw blade spins upwards as it forces the wood to be held between the blade and the base of the circular saw. The teeth on your circular saw blade should point in an upward direction at the front of the saw. All circular saw blades spin in an upward direction with the teeth pointing up towards the base of the saw.
A challenge when determining the right direction for table saw teeth is that the saw conceals most of the blade, making it hard to see the teeth. Hand saw: If you’re using a non-motorized hand saw for cutting wood, the blade’s teeth should always point in a downward direction. If you’re not sure which direction the teeth on your saw blade should point, contact an expert on the team at Luxite Saw.
Unlike table saw blades that rotate clockwise, circular saw blades have been designed to spin in an anti-clockwise direction. Circular saw blade teeth always point up on the front side of the saw. When using circular saws, make sure that the blade points to the opposite direction of the table saw blades.
which way does a circular saw rotate Related Question:
Do all circular saws rotate the same direction?
Circular Saws This means that the circular saw cuts wood on the upstroke. For a right handed circular saw (most common), this means that the blade rotates counterclockwise, which is similar to the table saw. For a left handed circular saw, the blade rotates clockwise.
What direction does a saw blade turn?
Like miter saws, table saw blades rotate clockwise, meaning the teeth should be pointing down.
What happens if you put a circular saw blade on backwards?
You can run a saw blade backwards and it cuts pretty well. However it is not at all a good idea. The two big reasons not to do this is that saw tips are much more likely to come off if the saw blade is run backwards and that the whole saw blade is much more likely to come apart if it is run backwards.
Can you put a circular saw blade on backwards?
When cutting vinyl siding with a circular saw, install a fine-toothed blade backwards on the saw for a smoother, cleaner cut, especially in cold weather (when the material is brittle).
Why is my circular saw burning the wood?
Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty. If wood pitch resins build up behind the teeth of the blade, the cutting speed will slow down, increasing the chances for burns. Commercial blade cleaners are sold for this purpose.
Do circular saws cut up or down?
When appearance matters, make cuts with the good side facing down, as circular saws can splinter the wood on the top side. Making your cut line on masking tape can reduce splintering. Start over if you see that you’ve veered off from the cut line instead of trying to curve your way back on track.
Can you cut metal with a wood blade?
While a metal-cutting saw has a collection bin to prevent metal chips from getting into the machine, a woodcutting saw isn’t designed this way. If you do decide to use a wood saw on metal, only use a 7 1/4-inch blade and preferably a worm drive blade, which provides extra torque.
Is more teeth on a saw blade better?
More teeth means a smoother cut, fewer teeth means that the blade removes more material. Crosscut blades have more teeth and make smoother cuts across the grain of the material, rip blades have fewer teeth, are optimized to cut with the grain, and remove a lot more material.
How do you know when your saw blade is dull?
Look for worn-down, chipped, broken and missing teeth or chipped carbide tips that indicate it’s time to replace a circular saw blade. Check the wear line of carbide edges using a bright light and magnifying glass to determine if it’s beginning to dull.
How deep can a 7 inch circular saw cut?
Circular Saw Sizes Standard-size saws use 7 1/4-inch blades and can cut a maximum depth of about 2 1/2 inches.
Why are circular saws backwards?
Traditionally, all worm drive saws operated in a blade-left orientation. Furthermore, this orientation likely places the weight of the saw over the portion of the material the user wants to keep, making it easier to stabilize the saw during the cut.
Why are so many circular saws left-handed?
The placement of the cordless saw blade, on the left side, gives you a clearer line of sight when you cut. The reason for this is because the main bulk of your circular saw is not blocking your view. Cordless circular left-handed saws provide you better movability.
Can a circular saw cut curves?
Circular saw technique The first tool that comes to mind for cutting curves is a jigsaw, but if the curve is gradual, try a circular saw instead. It’s surprisingly quick and easy to cut a smooth curve with a circular saw. This method is for cutting rough curves. Don’t try to make furniture with this technique.
Can I use diamond blade to cut wood?
According to DIY blog Hunker.com, diamond blades aren’t the best choice for cutting wood. As stated earlier, these saws are manufactured to handle the toughest materials, and wood isn’t one of those. Wood, especially boards, have soft fibers which can easily be damaged when the cut is not done correctly.
Can I use a grinder blade in a circular saw?
The exposed blade can cause significant injuries as the uncontrollable tool flies backwards and strikes the operator. For these reasons, angle grinders must never be fitted with circular saw blades.
