More info about how do you get a chainsaw unstuck

Getting your chainsaw stuck in a tree can and will happen to most people who use a chainsaw from time to time. When the tree is on the ground, you will have better luck with different tools, and you don’t necessarily have the downward pressure of the entire tree on your chainsaw. Strategic use of wedges can ensure that the tree doesn’t fall back on your chainsaw so you can cut all the way through, and this also ensures the tree falls in the direction you want it to.

Misjudging where the tension is can cause the chainsaw to become trapped. It is never a good idea to shake your chainsaw while the engine is still running. To do so could cause irreparable damage to your chainsaw and potentially fatal injury to yourself or others.

Retired Conventional hand-felling logging operation with cable skidder and forwarder, Frick 01 handset sawmill. If possible, get into a couple of the courses of the Game of Logging and,. I’ve used a car jack to lift the log and get the saw out works on big logs too.

There are various techniques that people use to keep the chainsaw from getting stuck. People usually use the crosscutting process of cutting the wood; with this method, you will get the job done without the chainsaw getting stuck. Using a chainsaw intended for remote work can help limit the danger of your chainsaw from getting squeezed or caught.

how do you get a chainsaw unstuck Related Question:

Why do chainsaws get stuck?

Everyone Gets Pinched Well, blades can easily get stuck when you’re cutting downwards and the log or tree is not perfectly level with the ground. If a log is not sitting firmly on the ground when you cut, the downward force can cause the log to close up on your chain.

Why does my chainsaw not turn?

The chain tension may be too tight. Easy fix, just loosen the bar-retaining nuts and rotate the tensioning screw counterclockwise to the correct tension. Then tighten the nuts back up.

Should a chainsaw chain move freely?

The chainsaw chain should feel snug but still pull freely. Finally, perform a “snap” test to ensure proper saw chain tension. Simply pull the chain on the underside of the guide bar down so one or two drive links are out of the guide bar rails and release it.

Which way will a tree fall when cut?

Plan the Notch The notch is what will allow the tree to fall properly, so you want it on the “fall side” so the tree will fall in the direction of the notch. The fall side should be the heaviest side of the tree. Cut at a comfortable working height.

What is the most common chainsaw injury?

The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.

What is the fastest way to remove a tree stump?

The fastest way to remove a tree stump is to use a tree stump grinder, which usually takes a few hours to completely grind it down.

How do you remove a stump from a chainsaw?

You can remove a tree stump with just a chainsaw by simply digging around the stump, cutting it as low as possible. Then cut crisscross slices into the stump 4-6 inches below ground level. Keep in mind to avoid the contact of the chainsaw with the ground.

What should you not do when a tree falls off?

When cutting up a felled tree, avoid touching the ground with the chain because even a brief encounter will severely dull the cutting teeth on your chain saw. If possible, cut partially through the tree and then rotate it to cut the rest of the way through.

How long should chainsaw blade last?

The lifetime of a chainsaw chain has no fixed limit and depends on usage and maintenance. The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.

Leave a Reply

Your email address will not be published. Required fields are marked *