Do your best to get the sharpening angle right so that you don’t dull the chainsaw blade too fast. Another thing to keep in mind is that cutting dirty wood might dull the chainsaw blade faster. You can’t expect the chainsaw blade to dull at the same rate every time because you’re likely doing different jobs that will take a different toll on the sharpness of the blade.
Your chainsaw blade gets dull so fast because your chain is hitting the ground, the tree is filled with dirt, and/or the bar is bent. A dull chainsaw blade will lead to wear of different components of the saw, including the clutch and engine since they would have to work harder because of the blade’s dullness. If you are cutting firewood that has been left on the ground, you would need to sharpen your chainsaw more often as the accumulated dirt would dull your blade faster.
When you consider how fast the chain is moving, it’s not hard to understand that it can become very dull very quickly. Just hitting one little rock can dull a chain instantly. Like DavidV said, get yourself a new chain, keep it out of the dirt and sharpen it after every tank of gas to keep it from getting dull.
“I have a Remington Rodeo 51cc Gas Chain Saw chainsaw.I use the following chains: – Oregon 18-Inch Pro-Guard Chain Saw Chain Fits Craftsman, Echo, Homelite, McCulloch, Poulan H72.- Oregon 20BPX072G Micro-Chisel Saw Chain.325-Inch Pitch.050-Inch Gauge 72 Drive Link Count. My problem is as follows. The chain goes dull WAY fast. Without exaggerating, when I put a brand new chain on the saw, I can saw maybe one or two 20 inch diameter PINE trees, before the before the saw stops auto-feeding, and cutting properly. Earlier today I put the”Oregon Pro-Guard” chain on my saw, validated the chainsaw had enough bar and chain-oil and tried cutting a 16-inch diameter Red Oak. Do some night cutting!!!! I wonder how many sparks you will see. Ok lets see a picture of the dull chains…. and the naked bar if possible from an end sighting down.
People often complain about how the chainsaw blade can become dull in a matter of 10-15 minutes. There are a few factors that determine why your chainsaw blades dull quickly. If your chainsaw comes in contact with dirt or sand and picks them up, the chances are high that it will dull very quickly.
how quickly does a chainsaw get dull Related Question:
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
How long does it take to dull a chainsaw chain?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
How long should a chainsaw chain last?
The lifetime of a chainsaw chain has no fixed limit and depends on usage and maintenance. The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
How often should you flip the bar on a chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
How many times can I sharpen a chainsaw chain?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.
Does dirt dull chainsaw blade?
Nobody plans to run their chain saw into dirt. But when you cut close to the ground, you’re just begging for a quick dip into dirt, rocks and crud. All it takes is a second in the dirt to dull the cutters. In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch.
How much does it cost to sharpen chainsaw chain?
HOW MUCH DOES IT COST FOR YOU TO SHARPEN MY CHAIN PROFESSIONALLY? If you bring the chain into our shop off your saw, our average chain sharpening price ranges from $13- $16.00, depending on the number of cutters.
Is it worth it to sharpen a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
What is the longest lasting chainsaw chain?
Even more durable than standard chain is carbide-tip chainsaw chain. Carbide tips last longer than chrome and are not affected by heat. Because of these qualities, carbide chain is excellent for cutting objects that would dull standard chain quickly, such as railroad ties.
How long do Husqvarna chainsaws last?
It ultimately comes down to the factors listed above (especially maintenance). That being said, you can expect a quality chainsaw to last you at least 10 years or more. But if you take care of it, I know people who have saws that have lasted 20-30 years and even longer.
Why do chainsaws leak bar oil?
When a chainsaw is in use most of the oil is absorbed by the log and sawdust produced by the chain, therefore leaving little to drip to the surface under the saw.
Why do loggers Run chainsaw bars upside down?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
What chainsaw chains do professional loggers use?
Full-chisel teeth chains are usually used by professionals on large saws. Semi-chisel teeth are rounded, so the risk of kickback is less, and they stay sharper longer. Semi-chisel teeth cut slower but are a better choice in dirty wood than full chisel.
How do you know if your chainsaw clutch is bad?
Does the engine loose revs, or the engine keep revving and just the chain stops? If the engine is still running at normal revs, and the chain slows down, then it’s a problem with the clutch. Worn out, gummed up, jammed springs etc. If the engine looses revs under load then it’s more likely a fuel or carb problem.
Should you run a chainsaw at full throttle?
Engine Protection Generally, two-stroke chainsaw engines are built to conveniently run at full throttle without an engine breakdown. Therefore, running at any throttle speed below the full throttle is not advised.